User's Manual

2-4 Basic Operations 700 U (C) User Manual
2.3.2 “Pause” Function
This function allows you to add a stop or break between the digits of a
phone number when the phone dials it.
1. Dial the first part of the phone number. Press and hold down
for 2 seconds, the pause symbol “ ” will be displayed on
the screen.
2. Dial the second part of the phone number.
3. Press to send out the first part of the phone number to the
network. Wait for the call to be answered then press to
send the second part of the phone number.
 Note:
 Pause “ ” cannot be the first characters of a dialing string (phone
number).
 Using Pause more than once increases the length of delay between the
numbers. The number following the second pause “ ” will be
automatically dialed.
 Two or more pauses may be required to access a long distance service or
other network equipment.
 The Pause function is not available on all terminals.