User's Manual
Table Of Contents
- cov - Safety Precautions
- ch1 - Before Using Your Phone
- ch2 - Basic Operations
- ch3 - Phone book
- ch4 - Other Essential Functions
- Other Essential Functions
- Table of Essential Functions
- Own Phone Number Display
- Selecting a Ringing Volume
- Selecting a Ringing Tone
- Selecting a Keypad Tone
- Setting the Date and Time
- Setting the Alarm Clock
- Entering an IP Card Number and Password
- Restricting your calling information (phone number)
- Setting the Handover Tone
- Out of Service Area Alarm
- Toll Call Lock and Password
- Setting the Display Contrast
- Selecting a Language
- Animation
- Scheme (Background Image)
- Other Essential Functions
- ch5 - Maintenance & Troubleshooting
1-6 Before Using Your Phone 700 U (C) User Manual
1.5 Battery Installation
1.5.1 Battery Insertion
1. Remove the cover by sliding while pressing towards the base of the phone
as illustrated.
2. Connect the cord of the battery by firmly
inserting the connector until a click is heard.
Check the orientation of the connector before
inserting.
(
((
( Note: The battery cord is color-coded, the red line is
positive (anode), the black line is negative
(cathode) and the yellow line is a sensor
output
3. Insert the battery into the compartment of the
phone. Place the cord between the phone body
and the battery.
Connector pin
b
lac
k
red
yello
w
(
((
( Note: When installing the battery, make sure the connector of the battery cord is
firmly inserted into the connector pin of the phone. Do not use excessive
force when handling the battery cord.
4. Attach the battery cover. Fit the cover into the slots and slide towards the
top of the phone until a click is heard. Do not pinch the battery cord with
the cover.
5. Be sure to charge the battery for a minimum of four hours before first use.