User's Manual
Table Of Contents
- cov - Safety Precautions
- ch1 - Before Using Your Phone
- ch2 - Basic Operations
- ch3 - Phone book
- ch4 - Other Essential Functions
- Other Essential Functions
- Table of Essential Functions
- Own Phone Number Display
- Selecting a Ringing Volume
- Selecting a Ringing Tone
- Selecting a Keypad Tone
- Setting the Date and Time
- Setting the Alarm Clock
- Entering an IP Card Number and Password
- Restricting your calling information (phone number)
- Setting the Handover Tone
- Out of Service Area Alarm
- Toll Call Lock and Password
- Setting the Display Contrast
- Selecting a Language
- Animation
- Scheme (Background Image)
- Other Essential Functions
- ch5 - Maintenance & Troubleshooting
1-2 Before Using Your Phone 700 U (C) User Manual
1.2 Phone Spec
Transmission power Approximately 10mW on average
Battery DC 3.6V Ni-MH battery, at least 500mAh
Size 118×44 ×27mm (L×W×H) (excluding antenna)
Weight Approximately 110g (including battery pack)
Charger Input: AC 220V±10%, 50Hz or 110VAC ±10%, 60Hz
Output: DC 4V, 225mA(CC mode)/6.1V 30mA (CV mode)
Power consumption: about 2W
Charging time Approximately 3.5 hours
Continuous standby time
48~250 hours
Table 1-1: Phone Specification
(
((
( Note: The length of standby time the battery can supply power is determined by the
telephone usage. The following actions or situations can consume more power
and reduce the standby time.
Migration to areas where signal strength is weak.
Moving through the service area.
Talking on the phone for long periods of time.
Ringing volume is set to the maximum.
Earpiece volume is set to the maximum.
Leaving the phone in hot or cold places such as a car will reduce the
capacity and life of the battery. A phone with a hot or cold battery may
temporarily not work even when the battery is fully charged.
Repeated changing of phone parameters. (i.e. Adding or deleting entries
to/from the phonebook feature)