User Manual

2-16 Learning to use your phone UT618 User Manual
2.14 Rejecting Unidentified Call
• If you subscribe to caller ID service, you can turn on this function to reject
unidentified calls. If you don't subscribe to caller ID, please turn off this
function. Otherwise, it will reject all calls. The default setting is "OFF".
1. Press
. "Security" menu appears.
2. Press to turn " No ID Block " from "OFF" to "ON"
)
))
) Note:
• Unidentified short messages cannot be rejected.
• Call Block is only available in Public Mode.
• When a caller uses unidentified number calling function to call a phone with
" No ID Block" function turned on, the call will be rejected directly. The
phone will not ring or vibrate. " No ID Block MSG, Playing" will be
displayed on the screen.
2.15 Showing Talking Time
• If the Talking Time function is activated, call length will be displayed
during the call. The default setting is "ON".
1. Press to display "Screen LCD" .
2. Press . "Talking Time" changes from "OFF" to "ON".
)
))
) Note:
• After Step 1, you may move the cursor to "Talking Time" then press
to toggle between ON/OFF.
• Talking Time is only for reference and cannot be used as evidence of
service charges.
2.16 Power Searching
• You can search for high power if the signal is weak while in a call or in
standby mode. You can also do this when you are outside of the service
area.
1. Press and hold
at standby screen until "Power Search" screen appears.
The phone starts to search for network signals.
• "Power Search OK" will be displayed on locating the strongest signal.