User Manual

UT618 User Manual Learning to use your phone 2-7
)
))
) Note:
• You can also press
first, then dial. But this will cause a few
seconds delay between end of dialing and sending out the signal.
• In step 4 if you type in 32 numbers, you will not be able to press
to search the phone book.
• You cannot dial when you are not in the service area.
• If the phone's "Toll Lock" is turned on, and you attempt to dial a
long distance number the screen will display "Toll Lock”.
2.5 Dialed Number Record
• Phone numbers that are already dialed previously, short messages,
number memo, and automatically received emails will be recorded in
"Dialed Record", with a maximum total of 20 records. (There can be
only 1 automatically received email; new email will replace the
previously saved one). If there are more than 20 records, the old ones
will be replaced by the new ones.
2.5.1 Redialing a number / resending a short message
2. Press to show the latest dialed number.
• If there is no dialed number, it will show "No Record"
3. Press to select the phone number to call or to send short message.
: Display dialed number with the oldest date
: Display dialed number with the recent date
• If the oldest dialed number is displayed, pressing will return to
the most recent dialed number.
3. Press to dial the selected number
• If you select a number that was used for sending a short message,
redialing the number will send the same message.
4. Press to terminate the call.
• It is not necessary to press
when resending short messages.
)
))
) Note:
• Numbers saved as Number Memo are saved as Dialed Record. A
total of 20 numbers can be saved.