User Manual

6-4 Short Message Service UT618 User Manual
: Indicates read message.
• Press
to display the detailed information.
3. Press
to select a message press , to display the “SMS”
content screen.
4. Please refer to section “Composing a New Message” Steps 2-8 to
edit and send the message.
6.3 Composing an Animation Message
6.3.1 Adding an animation/frame
• You can add one animation or one frame when you compose a message.
The phone can send up to 44 alphabets or 88 alphanumeric characters. If
you add both animation and frame in one message, it can send up to 43
alphabets or 86 alphanumeric characters.
• The receiver’s phone needs to support the animation/frame feature to
view it. If the receiver’s phone model is different from yours, it may be
displayed incorrectly.
1. To enter message text and phone number, please refer to “Composing a
New Message” Step 1-7.
2. Press
to show the sub menu.
3. Press to select “Animation”, “Animation” icons are displayed.
• Press to select “Frame”, the “Frame” is displayed along with
“No Frame” information.
• For animation and frame list, please refer to the next page.
4. Press
to select the frame or animation you want to add.
5. Press
to confirm it. If the message is added with the frame, “ ”
will be displayed on the upper side of the text area; if an animation is
added, “ ” will be displayed.
• Press
to select “View” to preview the completed SMS
press
or to go back to SMS editing screen.
6. Press
, to display “Sending”. The phone transmits the message.
Once it is sent, “End Sending” will be displayed.
• You can also press
to select “Send” press to send it.