User Manual

6-2 Short Message Service UT618 User Manual
• You can enter up to 45 alphabets or 90 alphanumeric characters.
• Press
to use Mark, Emoji and Canned MSG. To use these functions
please refer to section on “Entering Symbols”.
• Press
or , the carriage return symbol “ “ will be displayed,
which indicates the next line.
• If the number of characters is over limit, you cannot enter characters
any longer.
4. Press to select “Number” item.
• Press
to select “View”. It allows you to preview the message
press or to go back to SMS menu.
5. Press to enter “Number”.
6. Enter the recipient’s phone number.
• You can select the phone number from the dialed record, the incoming
record or the phone book.
• Press : Search from the dialed record.
• Press : Search from the incoming record.
• Press : Search from the phone book.
7. Press to select “Send”.
8. Press
to dial and send the message. “Sending SMS” will be displayed.
• When the phone starts transmitting the message, the recipient’s phone
number will scroll from the right side to the left side.
• If you have entered the text and the number, you can press
to send
it.
• When the message has been sent, “End Sending” will be displayed. The
phone will simultaneously play the sent beep.
• If the sending fails, the display will show error information based on
various failure reasons.
)
))
) Note:
• While composing a message, if there is an incoming call or if you want
to stop editing, press
, the phone will automatically and temporarily
save the message.