User Manual

14
Main Unit Site Selection
Choose a suitable location for the FSU Main Unit. Make sure the site will not expose
the device to:
• Direct sunlight
• Dampness or moisture
• Dust
• Magnetic fields
• Vibration
• Extremes of heat, cold or humidity.
Install the FSU on a stable surface, such as a desk or wall. Consider the length of the
AC Adapter cord in determining the Main Unit’s location. To avoid possible
interference from the connected telephone, make sure the Main Unit is installed at least
1 meter away. To minimize the length of coaxial cable between the main unit and the
antenna, position the indoor main unit as close as possible to the outdoor antenna.
Note : Make sure that the FSU Main Unit is positioned so that the green
LEDs are visible to the subscriber. When reporting trouble, the
subscriber will be asked the status of the LEDs.
Installation Accessories, Standard and Special Tools
This section lists all the equipment needed for and FSU installation. Be sure to have
all of these items on hand before beginning.
Accessories:
•
Coaxial cable
•
Coaxial cable connector (2 pieces)
•
Marker
•
PVC tape
•
Self-adhesive rubber tape
•
Earth cable
•
Solderless grounding terminal (optional)
•
Bracket for cable