User Manual

21
9. Connect the coaxial cable to the antenna as shown in
Figure 2-6.
Coaxial Cable
Figure 2-6 : Coaxial Cable Connection to Antenna
10. Wrap the cable connection first with the
self-adhesive rubber tape. Stretch the tape until it is
½ its original width. Then wrap the PVC tape around
the rubber tape.
2.3 OPERATION
Desktop Phone will start its function when you insert the DC plug into DC IN jack.
It will communicate with PHS base station automatically, and operation will be
available after few seconds.

Placing a Call
Pick up handset.
Dial tone will be heard from the handset receiver.
Dial a telephone number of your party.
Ring-back tone will be heard from handset receiver.
When your party answer your call, conversation will be available.
Hang up the handset when you finish the conversation.
You can call the party you last called by depressing "REDIAL" key for less than
1 second after hearing dial tone.