User Manual

Menu
3. Enter the password (Password) and press the left soft key
(Ok)
to complete the IP Phone setting
- Your input keystrokes will be encrypted and displayed with “*”. A
maximum of 10 digits (including “P”s, “#”s and “*”s) can be entered
~ Note: To cancel the IP Phone setting, follow the same steps. In
each step, press and hold the right soft key
(Clear) to erase
the input digits, and then press the left soft key
(Ok)
4.4.9 Set Security
ÆSettingsÆSet Security
This option enables you to set the security level to protect your phone
After accessing this option, you will be prompted to enter the security
code. Key in the security code and press the left soft key
(Ok). If
correct, the following options will be available (otherwise Code Error will
be displayed)
4.4.9.1 Toll Lock
This function enables you to protect against someone using your phone to
make a long distance phone call without permission. When this option is
highlighted, its current setting will be displayed in the adjacent bubble
After accessing this option, select ON or OFF to activate or deactivate
z If this function is activated, the indicator will be displayed; when
you try to make a long distance call, Toll Call Locked will be
displayed
4.4.9.2 PowerOn Code
If this function is active, the security code will need to be entered each
time you switch on the phone. When this option is highlighted, its current
setting will be displayed in the adjacent bubble
After accessing this option, select ON or OFF to activate or deactivate
55