User Manual

Basic Operations

1. In standby mode, press and hold the corresponding speed dial key to

automatically display the phone number

2. Press

to call the number

If you have configured the IP Phone function, you can press and hold

to call the number in IP mode. See also “Make an IP Call”

2.4 Make an IP Call

This function requires network support. If the IP Phone function has been

correctly configured, you can call a phone number in IP mode by pressing

and holding

, in either of the following ways:

z Enter the phone number; press and hold to call the number. IP

Call will be displayed

z Press and hold . After successfully connecting to the IP network,

begin to dial by following the network instructions

~ Note: When you are making an IP call, only the IP access number

and the text IP Call are displayed

~ Prior to using this function, the IP access number, account number

(accounts) and password must be correctly pre-configured (see “IP

Phone” for details). Otherwise, IP Not Set will be briefly displayed

after you press and hold

2.5 Answer a Call

z If the Answer Mode is set to Talk Key, press the left soft key

(Answer) or the

key to answer an incoming call

z If the Answer Mode is set to Any Key, press any key to answer an

incoming call except the right soft key

, the

key or the

key