User Manual

WiFi Settings -> MISC
76
6.6 MISC
From this submenu, you can perform the following operations:
6.6.1 Remote Update
This option enables you to perform a remote HTTP upgrade of the mobile
phone’s software. It’s a long progress.
When there are new configuration and software updated available, once
the phone has connected to the Internet successfully via the AP (Access
Point), the GF210 will need to be provisioned with the latest configuration
and software. If there is no key-press in 30 seconds, this process will start
automatically and will take several minutes to complete. During this time,
several status messages such as downloading, decompressing will be
displayed on the phone’s display. Once complete, the phone will reboot.
After remote HTTP upgrade, the phone will use the same process as
previously described for connecting to Access Points (Refer to Section
6.3).
œ Note: This option is only available under the guidance of a remote
server.
œ Note: Before starting this operation, please ensure the phone has
enough battery power or is connected to the charger.
œ Note: If errors occur during software downloading, the phone will
keep using the original software. Restart the phone and repeat
remote upgrade operations to update the phone’s software.
6.6.2 Remote server
This option enables you to set a remote server for the phone.
After accessing this option, enter the IP address or domain name of a
remote server, and then press (Save) to complete the operation.