User Manual

WiFi Settings -> Net Search
73
6.4 Net Search
àWiFi-SettingsàNet Search
This option enables you to search available APs (10 maximum) for the
phone. APs can be defined and saved using the Net Search feature if APs
have broadcast turned on and the phone is within their ranges.
After accessing this option, select the Start option, the phone will start to
search for APs. Available APs will be listed according to the signal
strength. The strongest AP’s SSID will be highlighted at the top of the list.
Those without a lock icon next to the name are open APs; those with a
lock icon ( or ) are protected APs and you will need to supply their
WEP keys or WPA-PSKs to access them.
Press to highlight the desired SSID, and press the left soft key
(Ok). Press to highlight the desired AP profile, and press
the left soft key (Ok) to save the SSID to the AP profile.
You can then follow the prompt to set the security mode and/or the
encryption code (WEP key or WPA-PSK) and activate the AP profile. For
detailed operations, refer to Section “6.3.1 AP Profile”.
œ Note: If no AP has been found, the phone prompts No AP Found.
œ Note: If the desired AP has broadcast turned off, the AP can be
entered directly through a series of keystrokes on your phone.
(Refer to “6.3.1 AP Profile”).
6.5 Net Service
à WiFi-Settings àNet Service
œ Note: All the network services require the network support. Contact
your local service provider for assistance.