User Manual

WiFi Settings -> WiFi Config
72
Select this option to connect to the AP according to the AP profile setting.
If the connection fails, the phone will try to connect to other AP profiles
APs.
If the phone fails to connect to all these APs and the Auto Scan function
is active, the phone will try to search and connect to another available
open AP (Refer to Section 6.3.3 Auto Scan).
6.3.2 AP Scan Channel
After accessing this option, select All Channels or User Define, and then
press the left soft key (Ok) or the key.
If selected User Define, please continue to key in the channel that you d
like to define (maximum 6 bytes), press the left soft key (Save) to
complete the operation.
Press the key twice to enter +.
6.3.3 Auto Scan
If the Auto Scan function is active, when the phone is switched on and
fails to connect to the APs specified in AP Profile, the phone will do a
scan for available APs and try to connect to one open AP of these
scanned APs.
After accessing this option, select Enable or Disable to activate or
deactivate the Auto Scan function.
œ Note: If the phone fails to connect to all the specified and scanned
APs, the phone will periodically retry AP connections.
œ Note: If the phone fails to register with the service network after the
AP connection, the phone will prompt you to try another AP.