User Manual

WiFi Settings -> WiFi Config

6.3.1 AP Profile

This option enables you to set up to four AP (Access Point) profiles. Each

time you switch on the phone, the phone will try to connect to one of these

APs according to their respective profile settings.

After you select this option, the AP profile list will be displayed. If the

security mode of an AP profile is set to WEP Key, the icon will be

displayed in front of the AP profile. If the security mode is set to WPA-PSK,

the icon will be displayed in front of the AP profile. If the security mode

is set to Open AP, no icon will be displayed in front of the AP profile.

Press to highlight the desired AP profile, and then press the left

soft key (Ok). The following options will be available:

SSID

This option enables you to save an AP’s SSID to the AP profile.

After accessing this option, enter the SSID (32 alphanumeric characters

maximum), and then press the left soft key (Save) to complete

the operation.

Security Mode

This option enables you to set the security mode for the AP profile.

After accessing this option, select Open AP, WEP KEY or WPA-PSK:

l If WEP KEY is selected, the phone will then display the option of WEP

Key Info (refer to “WEP Key Info”)

l If WPA-PSK is selected, the phone will then display the PSK-editing

screen (refer to “WPA-PSK Info”)

WEP Key Info

If the AP profile’s security mode is set to WEP Key, select this option to