User Manual

Basic Operations

2. BASIC OPERATIONS

2.1 Switch the Phone On/Off

Press and hold the power key to switch the phone on/off.

If the Power On Code function is active, after switching on the phone,

enter the security code (with each input displayed as *) and press the left

soft key (Ok). If correct, the power-on animation will be displayed;

otherwise Code Error will be displayed (Refer to Section “8.5.2 Phone

Code”).

If a SIM card is inserted and the Power On PIN function is active, the

phone will request you to enter the PIN code after you switch on the

phone. Input it and press the left soft key (Ok) (Refer to Section

“8.5.1 PIN Protect”).

• The phone will search for the network signals according to the mode

choice. Then the phone enters standby state.

• If no SIM card is inserted into the phone, in Dual attach or Only GSM

mode, it displays Insert SIM. If the phone fails to search the network, it

displays Out of network. If the phone fails to acquire full service, it

tries to acquire limited service. And if the phone is able to acquire

limited service, it displays Limited Service. If GPRS service is

registered, the phone will automatically attach GPRS service.

• In Dual attach or Only WiFi mode, if the phone fails to search WiFi

network, it will search the network and manage to camp it every 3

minutes.

• In Dual attach or Only GSM mode, if no SIM card is inserted or the

phone fails to search GSM network, pressing the right soft key (SOS)

can setup an emergency call. Emergency call log will not be added to

dialled numbers.