User's Guide

23
service provided will be equivalent but not exactly the same
as wired line service.
• NOTE:
∗ Before dialing, make sure that signal strength is sufficient.
∗ Pick up the receiver and wait for the dial tone before
dialing. Dial tone can be delivered from the Central Office
to the phone and may be delayed slightly to allow the
connection to be established, depending on local service
options.
∗ It is normal if there is a delay after dialing while the
system is setting up the wireless connection.
∗ If you have subscribed to Voice Mail service, and the
system is optioned for Central Office dial tone, please
listen for stutter dial tone to determine if you have a voice
mail message. (REQUIRES NETWORK SUPPORT)
• If you have picked up the phone but not yet dialed a number,
and a call is coming in, there will be no ring nor caller ID
displayed but a tone in the receiver. Press the cradle button
to answer the call (This action should finish in 1 second).
• The communication quality of the phone is directly affected
by the signal-reception condition of FSU810. Therefore
please put FSU810 at an appropriate position and keep it in
the region of the Network.
• Pressing and holding the power key switches FSU810 on or