User's Manual

Basic Operations
2. BASIC OPERATIONS
2.1 Switch the Phone On/Off
Press and hold the power key . The phone will display the
power-on/off animation.
If the PowerOn Code function is active, after switching on the phone,
enter the security code (with each input displayed as *) and press the left
soft key
(Ok). If correct, the power-on animation will be displayed;
otherwise Code Error will be displayed.
2.2 Make a Call
~ Note: Prior to making or receiving calls, the phone must be
connected to a wireless Access Point (AP) and registered with the
network. See “WiFi” on page 81 for detailed instructions.
1. Key in the phone number.
Press
to move the cursor. Press the right soft key (Clear)
to delete the character or digit to the left of the cursor. To delete all the
numbers or characters, press and hold the right soft key
(Clear).
2. Press
to call the number. “Connect...” will be displayed.
To cancel the call attempt, press the right soft key (Cancel); a
time display of 00:00:00 will appear. You can also press the
key
to cancel the call; the phone will return to standby mode.
3. When the call is connected, the call timer is displayed.
4. To end the call, press the right soft key
(Hangup) or the
key, or close the flip cover.
16