User's Manual

Input Method
5.4 Letter
Switch to Letter input method; will be displayed at the upper right
corner of the screen.
1. Press
~ to enter the corresponding letter labeled on the
respective key. To input a letter, press the corresponding key
repeatedly until the letter appears.
For example: if you press
repeatedly, the following letters
appear in turn:
- The letter just entered will be underlined. When the letter is
underlined, press
to switch between upper and lower cases;
press the right soft key
(Clear) to delete the letter
2. After you have entered the intended letter, press any other key on the
keypad to input the next letter. If the next letter and current letter share
the same key, press the left soft key
(Ok) or to remove the
underline, and then enter the next letter; or simply wait for one second
to input again. Press
to confirm the current letter input and enter
a space.
3. When no letter is underlined, press
to enter a space; press
to move the cursor; press the right soft key
(Clear) to delete the
character to the left of the cursor; press and hold the right soft key
(Clear) to delete all characters; press to switch input methods.
100