User's Manual

62
SETTINGS
3. Select “Train Words” or “Train Digits”. You will be prompted to
speak the words listed on the screen. Say each word as you are
prompted.
4. Press [Stop] to stop train voice.
PROMPT
The prompts settings, “Mode” or “Timeout", will allow you to set how
you are notified by the voice command system and the duration in
which you can respond. To access “Prompts:”
1. Press [Menu], then press for the “Settings” menu.
Press “VR Settings”.
2. Press “Prompt“.
3. Select “Mode“ or “Timeout”.
4. Press [Done] to save it.
CALL ALERT
The “Call Alert” setting controls how you are notified when receiving a
call. “Name + Ring” will first announce the name and then play the set
ring tone. “Ring only” will play the set ring tone only. “Name Repeat”
continuously states the name or number until the call is answered or
incoming call alert ends.
1. Press [Menu], then press for the “Settings” menu.
Press “VR Settings”.
• Mode: Select "Prompt" or “Tones Only”.
• Timeout: Select “5 sec” or “10 sec”.