WELCOME TO UTSTARCOM Thank you for choosing the up-to-date UTStarcom CDM-7025SP, our new model, developed by top researchers to support the CDMA2000 1X system through Qualcommmanufactured MSM6050 chips and CDMA technologies. This product allows for high speed communication services and a GUI animation menu. T9 input mode makes it much easier to enter text, while VR (Voice Recognition) makes the UTStarcom more user friendly.
WELCOME TO UTSTARCOM This UTStarcom user guide contains very important information about how to handle and use the product. Please read this manual thoroughly, pay attention to the warranty on the back page and be alert to the exclusions and limitations of your warranty, which are related with the unauthorized use of components.
TABLE OF CONTENTS CHAPTER 1. BEFORE USING YOUR PHONE PACKAGE INCLUDES .............................................................................................9 HANDSET DESCRIPTION ......................................................................................10 BATTERY USAGE .................................................................................................14 POWER CONNECTION ........................................................................................................
TABLE OF CONTENTS DURING A CALL ..................................................................................................30 MUTE (UNMUTE) ................................................................................................................30 SEND TXT MSG ...................................................................................................................30 CONTACTS...............................................................................................................
TABLE OF CONTENTS RECENT CALLS.....................................................................................................48 MISSED ...............................................................................................................................48 RECEIVED............................................................................................................................49 DIALED....................................................................................................
TABLE OF CONTENTS CHAPTER 6. VOICE SIGNAL COMMANDS VOICE SIGNAL COMMANDS................................................................................87 VR SETTINGS.......................................................................................................................88 INFORMATION....................................................................................................................91 CHAPTER 7. MESSAGE MESSAGE ..................................................................
MEMO 7
CHAPTER 1 BEFORE USING YOUR PHONE CHAPTER 1 BEFORE USING YOUR PHONE This chapter provides important information about using the UTStarcom including: PACKAGE INCLUDES HANDSET DESCRIPTION BATTERY USAGE BATTERY HANDLING INFORMATION 8
PACKAGE INCLUDES This package should include all items pictured below. If any are missing or different, immediately contact the retailer where you purchased the phone.
HANDSET DESCRIPTION The UTStarcom weighs X.Xoz. The dimensions are X.XX” x X.XX” x X.XX”.
HANDSET DESCRIPTION (THE FUNCTION KEYS) In Idle Mode Press Up for VR, Down for Shortcut, Right for Fun & Games and Left for Setting & Tools. In Idle Mode Within a menu, use to scroll through menu options, or to select a function displayed on the screen. TALK Key Press to make or receive a call. End Key Press to turn the phone on/off, to terminate a call or to return to the initial page. Left Soft Key Press to access the message menu or function displayed on bottom line.
HANDSET DESCRIPTION (DISPLAY INDICATORS) The idle display appears when you are not on a call or using the menu. You must be in the idle display to dial a phone number. Display Indicators Display various icons. Text & Graphic area Soft Key Indicators Shows the functions currently assigned to each soft key and displays some icons. Signal Strength Current signal strength: the more lines, the stronger the signal (1X Mode/Digital Mode). Roaming Phone is out of home area.
HANDSET DESCRIPTION (DISPLAY INDICATORS) Battery Battery charging level — the more blocks, the stronger the charge. Alarm Only Phone will alert you with an alarm tone when call is received. Alarm Appears when either a calendar or an alarm is set. Vibrate Only Phone will vibrate when call is received. All Off Indicates the ringer volume is set to off. Voicemail Indicates you have voicemail messages. New Messages New TXT or voice message. Calendar Appointment Indicates Event Alarm is active.
BATTERY USAGE (BATTERY INSTALLATION) 1. Place the battery and place the battery cover on the back of the handset and slide into place. 2. Push the battery down until it locks into place.
BATTERY USAGE (BATTERY REMOVAL) 1. 2. Pull down the release latch, lift up the battery cover. Remove the battery from the handset. Note 15 If the battery is not correctly placed in the compartment,the handset will not turn on and/or the battery may detach during use.
BATTERY USAGE (BATTERY CHARGING) POWER CONNECTION 1. 2. Plug the AC Charger into a standard outlet. Plug the other end of the AC Charger into the bottom of your phone. The battery must be installed onto the phone. Hot Key • When you charge the battery with the phone power off, you will see a charging status screen. You cannot operate the phone until it is powered on. • The battery is not charged at the time of purchase. • Fully charge the battery before use.
BATTERY USAGE (BATTERY CHARGING) PCS AND 1X BATTERY TIMES The operating time is subject to your handset usage and configuration. Battery Capacity DCS PCS STD Up to XXX m Up to XXX m EXT Up to XXX m Up to XXX m BATTERY LIFE (FOR NEW BATTERY) The operating time is subject to your handset usage and configuration. Battery Capacity DCS PCS STD XXX Hours XXX Hours EXT XXX Hours XXX Hours Note 17 These times are for a new battery. Usage and Standby time may decrease over time.
BATTERY HANDLING INFORMATION DO’s Only use the battery and charger approved by the manufacturer. Only use the battery for its original purpose. l Try to keep batteries in a temperature between 41ºF (5ºC ) and 95ºF (35ºC). l If the battery is stored in temperatures above or below the recommended range, give it time to warm up or cool down before using. l Completely drain the battery before recharging. It may take one to four days to completely drain.
MEMO 19
CHAPTER 2 BASIC OPERATION CHAPTER 2 BASIC OPERATION This chapter addresses and explains the basic features of your phone including: TURNING THE PHONE ON / OFF ACCESSING THE MENU MENU SUMMARY BASIC FUNCTIONS DURING A CALL MAKING AN EMERGENCY CALL 20
TURNING THE PHONE ON / OFF TURNING THE PHONE ON 1. Press and hold END KEY until your “Power On” logo appears and the tone sounds. Note • If “Password” appears on the display enter your 4-digit password to unlock your phone. • The default password is the last 4 digit of your phone number. TURNING THE PHONE OFF 1. Press and hold END KEY until your “Power Off” logo appears. Note 21 • Immediately change or recharge the battery when “LOW BATTERY!! PHONE IS TURNING OFF!”appears on the display.
ACCESSING THE MENU Your phone can be customized via the menu. Each function can be accessed by scrolling with the Navigation Key or by pressing the number that corresponds with the menu item. 1. 2. To access the menu in the idle mode, press OK KEY [MENU]. Use the Navigation Key to scroll through the menu. To search through the menu in numerical order, press the Navigation Key. 3. To return to the previous page, press CLR KEY. To exit the current menu and return to the idle mode, press END KEY. 4.
MENU SUMMARY FUN & GAMES CUTY MESSAGE New Msg Inbox Sent Drafts Voicemail CONTACTS New Contacts Contact List Groups No Group Family Friends Work Speed Dials RECENT CALLS Missed Received Dialed All View Timers SETTINGS & TOOLS Tools Calendar Alarm Clock World Clock Notepad Calculator Stopwatch 23 Sound Settings Master Volume Call Sound Call Ringtone Call Vibrate Alert Sound TXT Message Voicemail Msg Keypad Volume Earpiece Volume Service Alerts ERI Minute Beep Call Connect Power On/Off Power On Power O
MENU SUMMARY Phone Settings Standalone Mode Short Cut Key Language Location Security Common Code Lock Mode Edit Code Erase Contacts System Select Nam Selection Call Settings Answer Options Auto Retry TTY Mode One Touch Dial Voice Privacy Call Restrictions Data Settings Select Port Port Speed DTMF Tones Ringer ID Memory Phone Info My Number SW Version Icon Glossary VR Settings Choice List Train Voice Prompts Call Alert 24
BASIC FUNCTIONS MAKING A CALL 1. Enter a phone number. Note 2. Press TALK KEY. Note 3. 25 To modify the phone number you have entered : • To erase one digit at a time press CLR KEY. • To erase the entire number, press and hold CLR KEY. Phone number display in contact list : If contact’s name field empty, then highest priority phone number displayed. If any phone number and name is not exist then email address diaplay. Referece “Contact display order”. All matching entries will be displayed.
BASIC FUNCTIONS ANSWERING CALLS 1. When your phone rings or vibrates, press TALK KEY to answer the incoming call. (Depending on your phone’s settings, you may also answer incoming calls by opening the phone or by pressing any digit key.) To ignore incoming calls, press RIGHT S.KEY [IGNORE]. 2. To end a call, press END KEY. WAIT/PAUSE FEATURE Pauses are used for automated systems (i.e., voice mail, calling cards). Insert a pause after a phone number then enter another group of numbers.
BASIC FUNCTIONS ANSWERING A CALL 1. To answer a call, press any key except END KEY, LEFT S.KEY, RIGHT S.KEY, CLR KEY, VOLUME KEY or NAVIGATION KEY. By pressing OK KEY [MENU] then select “Settings & Tools” menu, press 5 KEY, 1 KEY, you can select either “Flip Open”, “Any Key”, “Send Only” or “Auto Answer” to answer a call. lf “Send Only” is selected, the phone can only be answered by pressing TALK KEY. 2. To end the call, press END KEY.
BASIC FUNCTIONS Note If one of the people you called hangs up during your call, you and the remaining caller stay connected. If you initiated the call and are the first to hang up, all three callers are disconnected. CALLER ID FUNCTION Identifies caller by displaying their phone number. If the caller’s name and number are already stored in your phone book, they name will appear. The caller ID is stored in the recent calls.
BASIC FUNCTIONS ADJUSTING VOLUME Adjusts the volume of the ringer, key beep and earpiece. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY then select one of the following. Master Volume: Controls the ringer volume. Keypad Volume: Controls the keypad volume. Earpiece Volume: Controls the earpiece volume. 2. Adjust volume then press OK KEY to save it. Note 29 • To adjust earpiece volume during a call, press the Side Key up or down.
DURING A CALL MUTE (UNMUTE) The caller cannot hear you or any sounds from your side but you can still hear them. 1. Press LEFT S.KEY [MUTE]. • To deactivate, press LEFT S.KEY [UNMUTE]. • The phone will automatically unmute in Emergency Call or Callback mode. SEND TXT MSG Enables you to send a TXT message (SMS) during a call. 1. Press RIGHT S.KEY [OPTIONS], press 1 KEY. CONTACTS To select the phone number in your internal Contact List. 1. Press RIGHT S.KEY [OPTIONS], press 2 KEY.
DURING A CALL LOCATION Enables the network to locate your current location through Global Positioning System (GPS). 1. 31 Press RIGHT S.KEY [OPTIONS], press 5 KEY.
MAKING AN EMERGENCY CALL The 911 feature puts the phone in the Emergency Call Mode when you dial the preprogrammed emergency number, 911. It also operates in the lock mode and out of the service area. 911 IN LOCK MODE The 911 call service is available even in the lock mode. 1. 2. 3. Enter “911”, then press TALK KEY. The call connects. When the call ends, the phone returns to the Lock Mode. 911 USING ANY AVAILABLE SYSTEM 1. 2. 3. Enter “911”, then press TALK KEY. The call connects.
MEMO 33
CHAPTER 3 MEMORY FUNCTION CHAPTER 3 MEMORY FUNCTION This chapter addresses memory functions including: STORING A PHONE NUMBER ENTERING LETTERS, NUMBERS & SYMBOLS MAKING A CALL THROUGH THE PHONE BOOK 34
STORING A PHONE NUMBER The phone book stores up to 500 entries. 1. Enter phone # then press LEFT S.KEY [SAVE] then choose “Create New” or “Update Existing”. Press OK KEY to select. 2. If “Create New” is selected, the phone number will appear above a list. Press the Navigation Key up or down to choose the type of number you’re adding, as indicated by the icon. Press OK KEY to select. If “Update Existing” is selected, your contact list is displayed.
ENTERING LETTERS, NUMBERS & SYMBOLS The input mode (Alpha editor) will automatically be activated when necessary to enter letters and numbers. As shown below, there are 5 available modes ; Standard input mode (Abc), Input mode (Alpha), Numeric mode (123), and Symbol mode (Symbols). The input mode indicator appears on the upper right of the display when letters and numbers are entered. To select the desired input mode among the 5 modes below, press LEFT S.KEY [Abc], then enter letters and numbers.
ENTERING LETTERS, NUMBERS & SYMBOLS STANDARD INPUT MODE Use the digit keys to enter letters, numbers and characters. 1. Enter letters using the key pad, to change the input mode, press LEFT S.KEY [Abc]. 2. To enter a space, press SPACE KEY. The cursor will automatically move to the next column. 3. 4. Repeat until letters are entered. 5. To change from lowercase to uppercase, press SHIFT KEY. To delete one digit, press CLR KEY. To delete the entire entry, press and hold CLR KEY. E.G.
ENTERING LETTERS, NUMBERS & SYMBOLS ALPHA INPUT MODE The input mode incorporates a built-in-dictionary to determine a alpha based on the entered characters. A alpha can be entered more quickly by pressing a key once per character. 1. 2. 3. 4. Select the Alpha mode by pressing LEFT S.KEY [Abc]. Press a digit key once to enter the character you want then enter all the characters to input the word you want. To view the next matching word, press 0 KEY.
ENTERING LETTERS, NUMBERS & SYMBOLS NUMERIC MODE Allows you to enter numbers. 1. Press LEFT S.KEY [Abc] and scroll to the input mode to changes to “123 (Numeric mode)”. 2. To enter a number, press a digit key. SYMBOL MODE Allows you to enter symbols. 1. Press LEFT S.KEY [Abc] and scroll to the input mode to changes to “Symbols (Symbol mode)”. 2. Select symbol you want to enter with the Navigation Key. Note 39 Use the Navigation Key to view a different line of symbols.
MAKING A CALL THROUGH THE PHONE BOOK ONE-TOUCH/TWO-TOUCH DIALING Ideal for frequently dialed numbers, this feature allows phone book entries to be dialed via the keypad with only one or two key presses. ONE-TOUCH DIALING 2-9 : Press and hold the corresponding memory number for more than 1 second. TWO-TOUCH DIALING 10-22 : Press the first digit and second digits of the memory number short and long respectively.
MEMO 41
CHAPTER 4 MENU FUNCTION CHAPTER 4 MENU FUNCTION This chapter addresses accessing the menu and using its functions and features to customize your phone.
CONTACTS Stores up to 500 entries, each of which can be assigned to a group. Entries can be retrieved by name or group. NEW CONTACT Adds a new entry. 1. 2. Press OK KEY [MENU], press 1 KEY “New Contact”. To enter a name or number, use the Navigation Key to select the phone book field. PHONE BOOK FIELDS : Name/Mobile1/Home/Work/E-Mail1/Group/ Ringtone/Mobile2/Fax/E-Mail2. 3. To save the entry, press OK KEY [SAVE]. To return to the previous page, press CLR KEY.
CONTACTS CONTACT LIST Retrieves an entry by name and calls by simply pressing TALK KEY. You can review all the entries stored in your phone book list or quickly find an entry by entering a name or its character string. 1. Press OK KEY [MENU], press 2 KEY “Contact List” or press RIGHT S.KEY [CONTACTS]. 2. The list of names in your phone book is displayed alphabetically. 3. Enter a name or its character string or scroll through the list with the Navigation Key. 4. To edit the entry, press LEFT S.
CONTACTS GROUPS Allows you to classify phone entries into groups. Existing groups include No Group, Family, Friends, Work. A maximum of 30 groups is allowed. User can add group max 30 group (except “No Group”). Allows the user to add group up to 10 phone number or E-mail1, E-mail2. The user can add, change, and erase Group. ADD NEW GROUP 1. 2. 3. 4. Press OK KEY [MENU], press 3 KEY “Groups”. To select “New”, press LEFT S.KEY [NEW]. Input a new group name. To save it, press OK KEY [SAVE].
CONTACTS CHANGE GROUP NAME 1. 2. 3. 4. 5. Press OK KEY [MENU], press 3 KEY “Groups”. Select an existing group name that you have added with the Navigation Key. To select “Rename”, press RIGHT S.KEY [OPTIONS]. Input a new group name. To save it, press OK KEY [SAVE]. SEND TXT MSG. GROUP 1. 2. 3. 4. 5. Press OK KEY [MENU], press 3 KEY “Groups”. Select an existing group name with the Navigation Key. To select “Send TXT Msg.”, press RIGHT S.KEY [OPTIONS]. Input a “Message”, press RIGHT S.
CONTACTS ERASE GROUP 1. 2. 3. 4. Press OK KEY [MENU], press 3 KEY “Groups”. Select an existing group name with the Navigation Key. To select “Erase”, press RIGHT S.KEY [OPTIONS]. Select “Yes” to erase it, press OK KEY. SPEED DIALS In idle mode, calls can be placed to numbers stored in speed dial by pressing & holding the location number on the key pad. For a 2-digit location number, press the first number, then press and hold the second number. 1. 2. 3. Press OK KEY [MENU], press 4 KEY “Speed Dials”.
RECENT CALLS MISSED Displays information about the 90 most recently missed calls. Place a call to a missed call number by simply pressing TALK KEY. 1. To see a list of the 90 most recently missed calls, press OK KEY [MENU], then select “Recent Calls” menu, press 1 KEY “Missed”. If the number is already stored in your phone book, only the name appears. If the number is not stored, only the phone number appears. 2. To view missed call details, press OK KEY [OPEN]. Note 3.
RECENT CALLS RECEIVED Displays information about the 90 most recently answered calls. Place a call to a received call by simply pressing TALK KEY. 1. To see a list of the 90 most recently answered calls, press OK KEY [MENU], then select “Recent Calls” menu, press 2 KEY “Received”. If the number is already stored in your phone book, only the name appears. If the number is not stored, only the phone number appears. 2. To view incoming call details, press OK KEY [OPEN]. Note 3.
RECENT CALLS DIALED Displays information about the 30 most recently dialed numbers. Place a call to a dialed call by simply pressing TALK KEY. 1. To see a list of the 30 most recently dialed numbers, press OK KEY [MENU], then select “Recent Calls” menu, press 3 KEY “Dialed”. If the number is already stored in your phone book, only the name appears. If the number is not stored, only the phone number appears. 2. To view dialed call details, press OK KEY [OPEN]. Note 3.
RECENT CALLS ALL Displays information about the most recent incoming, outgoing and missed calls. 1. To see a list of the 210 most recent incoming, outgoing and missed calls, press OK KEY [MENU], then select “Recent Calls” menu, press 4 KEY “All”. If the number is already stored in your phone book, only the name appears. If the number is not stored, only the phone number appears. 2. To view details, press OK KEY [OPEN]. Note 3. Call details include type of call, date, time and phone number.
RECENT CALLS VIEW TIMERS Checks the usage time and manages your calls within the limit you set. The 11 timers include (Last Call, All Calls, Received Calls, Dialed Calls, Roaming Calls, Transmit KB, Received KB, Total KB, Last Reset, Lifetime Calls, Lifetime Data Counter): 1. Press OK KEY [MENU], then select “Recent Calls” menu, press 5 KEY “View Timers”. 2. To reset the timer, press LEFT S.KEY [RESET], then select“Yes”, press OK KEY. To reset all timer, press RIGHT S.
SETTINGS Customizes your phone and optimizes performance through a variety of settings. SOUND SETTINGS MASTER VOUME Controls the Ringer volume and alerts you to in the modes listed in the gray box below (except Keypad Volume, Earpiece Volume). 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY “Sound Settings” then select 1 KEY “Master Volume”. 2. Select one of the following options by pressing the Navigation Key to the right.
SETTINGS CALL SOUND To select a ringer type for incoming calls: Call Ringtone 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY “Sound Settings” then select 2 KEY “Call Sound”, press 1 KEY “Call Ringtone”. 2. Select your desired ringer type. • Up or Down key: Select “Ringer”. • Press LEFT S.KEY to Play/Stop the ringer. 3. Select one of the available ring types. To confirm, press OK KEY. Call Vibrate 1.
SETTINGS ALERT SOUND When selected, this setting alerts you to the following handset changes: TXT Message 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY “Sound Settings” then select 3 KEY “Alert Sound”, press 1 KEY “TXT Message”. 2. Select “Tone”, “Vibrate” or “Reminder” with the Navigation Key then select one of the following options by pressing the Navigation Key. • Tone: Select your desired ringer type. • Vibrate: Select “On” or “Off”.
SETTINGS Voicemail Msg 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY “Sound Settings” then select 3 KEY “Alert Sound”, press 2 KEY “Voicemail Msg”. 2. Select “Tone”, “Vibrate” or “Reminder” with the Navigation Key then select one of the following options by pressing the Navigation Key. • Tone: Select your desired ringer type. • Vibrate: Select “On” or “Off”. • Reminder: Select “Once”, “Every 2 Minutes”, “Every 15 Minutes” or “Off”. 3. To save, press OK KEY.
SETTINGS EARPIECE VOLUME To adjust earpiece volume: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY “Sound Settings” then select 5 KEY “Earpiece Volume”. 2. Select one of the following options by pressing the Navigation Key to the right. • Low, Med Low, Med, Med High, High 3. Select one of the available ring types. To confirm, press OK KEY [SET]. SERVICE ALERTS ERI (Enhanced Roaming Indicator) Sounds an alert when leaving a service area and entering a roaming service area.
SETTINGS Minute Beep Sounds an alert every minute during a call. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY “Sound Settings” then select 6 KEY “Service Alerts”, press 2 KEY “Minute Beep”. 2. Select “On” or “Off” with the Navigation Key then press OK KEY to save it. Call Connect Notifies you that a call has been successfully placed. 1.
SETTINGS POWER ON/OFF Power On Allows you to activate/deactivate the power on tones. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY “Sound Settings” then select 7 KEY “Power On/Off”, press 1 KEY “Power On”. 2. Select “On” or “Off” with the Navigation Key then press OK KEY to save it. Power Off Allows you to activate/deactivate the power off tones. 1.
SETTINGS ALARM SOUND To select a ringer type for alarm sound: Tone 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 2 KEY “Sound Settings” then select 8 KEY “Alarm Sound”, press 1 KEY “Tone”. 2. Select your desired ringer type. • Up or Down key: Select your desired ringer type. • Press LEFT S.KEY Play/Stop to the ringer. 3. Select one of the available ring types. To confirm, press OK KEY. Vibrate 1.
SETTINGS DISPLAY SETTINGS Allows you to customize the display. BANNER To input a personal/ERI banner greeting: Personal The text greeting can be up to 16 characters and is displayed on your phone’s screen in standby mode. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 3 KEY “Display Settings” then select 1 KEY “Banner”, press 1 KEY “Personal”. 2. Enter a new personal greeting. To change the input mode, press LEFT S.KEY [Abc]. 3. Press OK KEY [SAVE] to save it. ERI Banner 1.
SETTINGS BACKLIGHT Backlights the display and key pad for easy viewing in dark places. Display 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 3 KEY “Display Settings” then select 2 KEY “Backlight”, press 1 KEY “Display”. 2. Select one of the following options with the Navigation Key. • 5 Seconds, 15 Seconds, 30 Seconds, Always On, Always Off. 3. Press OK KEY to save it. Keypad 1.
SETTINGS CONTRAST To adjust the display contrast: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 3 KEY “Display Settings” then select 3 KEY “Contrast”. 2. Select one of the following options with the Navigation Key. • Level 0 • Level 1 • Level 2 • Level 3 • Level 4 • Level 5 3. Press OK KEY to save it. WALLPAPER To adjust the display contrast: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 3 KEY “Display Settings” then select 4 KEY “Wallpaper”. 2.
SETTINGS SCREENSAVER To adjust the display contrast: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 3 KEY “Display Settings” then select 5 KEY “Screensaver”. 2. Select “On” or “Off” with the Navigation Key. If “On” is selected, to select Default to choose a pre-installed display, press LEFT S.KEY [VIEW]. Select a display from the Graphic list using the Navigation Key and press OK KEY to save it. 3. DISPLAY THEMES 1.
SETTINGS FONTS 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 3 KEY “Display Settings” then select 7 KEY “Fonts”. 2. Select “Normal” or “Large” with the Navigation Key then press OK KEY to save it. CLOCK FORMAT To change the clock’s appearance on the standby screen: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 3 KEY “Display Settings” then select 8 KEY “Clock Format”. 2. Select one of the following options with the Navigation Key.
SETTINGS PHONE SETTINGS STANDALONE MODE The device shall provide the ability for the user to turn off all radios in order to utilize the native or downloaded capability within the device when in areas where radio transmission is restricted. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 4 KEY “Phone Settings” then select 1 KEY “Standalone Mode”. 2. Select “On” or “Off” with the Navigation Key and then press OK KEY to save it.
SETTINGS LANGUAGE Selects the language in which letters are displayed on the screen. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 4 KEY “Phone Settings” then select 3 KEY “Language”. 2. 3. Select “English” or “Spanish” with the Navigation Key. Press OK KEY to save it. LOCATION To determine whether or not the network system can detect your position: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 4 KEY “Phone Settings” then select 4 KEY “Location”. 2. 3.
SETTINGS SECURITY Prevents unauthorized use of your phone. The following settings can be restricted: Common Code 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 4 KEY “Phone Settings” then select 5 KEY “Security”, then enter your password, press OK KEY. • The default password is the last 4 digit of your phone number. 2. 3. Press 1 KEY “Common Code”. Select “On” or “Off” with the Navigation Key and then press OK KEY to save it.
SETTINGS 3. Select “Device” or “Location” then select one of the following options with the Navigation Key. • Device: Lock, Unlock, On Power Up • Location: Lock, Unlock 4. Press OK KEY to save it. Note If the common code is “Off”, you must input the location lock code when entering the location mode. The default value is the last 4-digit number of the phone number. Edit Code Changes your Device/Location 4-digit password. 1.
SETTINGS Erase Contacts To erase all the names and phone numbers in your internal Phone Book: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 4 KEY “Phone Settings” then select 5 KEY “Security”, then enter your password, press OK KEY. • The default password is the last 4 digit of your phone number. 2. 3. 4. Press 4 KEY “Erase Contacts”. Read the message (Erase all Contacts?) Select “Yes” or “No” with the Navigation Key and then press OK KEY to erase it.
SETTINGS NAM SELECTION Enables Auto NAM (Number Assignment Modules) or manually selects a NAM. Auto NAM Automatically switches phone to proper NAM when you have multiple NAM registrations. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 4 KEY “Phone Settings” then select 7 KEY “Nam Selection”, press 1 KEY “Auto NAM”. 2. Select “On” or “Off” with the Navigation Key and then press OK KEY to save it. Change NAM Changes the NAM used by the phone when you have multiple registrations. 1.
SETTINGS CALL SETTINGS ANSWER OPTIONS To select an answer mode: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 5 KEY “Call Settings” then select 1 KEY “Answer Options”. 2. Select one of the following options with the Navigation Key. • Flip Open • Any Key • Send Only • Auto Answer 3. Press OK KEY to save it. AUTO RETRY Automatically redials a call up to 5 times after a set time interval. 1.
SETTINGS TTY MODE Your phone is able to operate with a TTY (Teletypewriter) device in digital modes. This feature is system dependent and may not be available in all areas. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 5 KEY “Call Settings” then select 3 KEY “TTY Mode”. 2. Select one of the following options with the Navigation Key. • TTY Full • TTY + Talk • TTY + Hear • TTY Off 3. Press OK KEY to save it. ONE TOUCH DIAL 1.
SETTINGS CALL RESTRICTIONS 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 5 KEY “Call Settings” then select 6 KEY “Call Restrictions”. 2. Press LEFT S.KEY [ADD], to input restrict phone number. (There is a 30-phone number limit). 3. Press OK KEY to save it. DATA SETTINGS Select Port Choose the select data port for the usage of your phone. 1.
SETTINGS Port Speed Choose the select data port speed for the usage of your phone. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 5 KEY “Call Settings” then select 7 KEY “Data Setting”, press 2 KEY “Select Port”. 2. Select one of the following options with the Navigation Key. • 19200 bps • 115200 bps • 230400 bps • AUTO (USB) 3. Press OK KEY to save it. DTMF TONES To adjust tone length: 1.
SETTINGS MEMORY To display total or available memory usage. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 6 KEY “Memory”. 2. 3. To see the “Total Used”, “Available Use” memory size. To return to the previous page, press OK KEY.
SETTINGS PHONE INFO Displays the information of your phone: MY NUMBER Displays the your phone number (MDN/MIN number): 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 7 KEY “Phone Info” then select 1 KEY “My Number”. 2. 3. You are to see the MDN/MIN number. To return to the previous page, press OK KEY. SW VERSION Displays the (Software/PRL/ERI) version: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 7 KEY “Phone Info” then select 2 KEY “SW Version”. 2. 3.
CHAPTER 5 PERSONAL ORGANIZER CHAPTER 5 PERSONAL ORGANIZER This section shows you how to use these features to turn your phone into a time management planner that helps you keep up with your contacts, schedules, ommitments, and games.
TOOLS CALENDAR Sets an event and reminds you of that event. ADD NEW CALENDAR Displays the your phone number (MDN/MIN number): 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 1 KEY “Tools” then select 1 KEY “Calendar”. 2. Move the Navigation Key left, right, up or down to choose a date in the calendar then press OK KEY. Press RIGHT S.KEY [OPTIONS] to 1. Erase or 2. Erase All. 3. Press LEFT S.KEY [ADD] to name field is highlighted.
TOOLS ALARM CLOCK 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 1 KEY “Tools” then select 2 KEY “Alarm Clock”. 2. Select one of the entries using the Navigation Key. To set a new alarm, choose alarm 1, 2, 3. To edit an existing alarm, select that alarm. Press OK KEY. 3. The setting field will be highlighted. Press the Navigation Key down to select alarm options. 4. To save an alarm setting press OK KEY [SAVE].
TOOLS WORLD CLOCK 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 1 KEY “Tools” then select 3 KEY “World Clock”. 2. 3. Select a city with the RIGHT S.KEY [CITIES]. The world map appears with the city, its date and time. Use the Navigation Key to select another city. Note 4. 81 If user press LEFT S.KEY [DST], then all DST supporting cities DST turn on/off. To return to the previous page and save current view city’s time information, press OK KEY.
TOOLS NOTEPAD Your phone includes an internal notepad that can be used to compose and store reminders and notes. ADD NEW MEMO To compose a memo (there is an 80-letter limit): 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 1 KEY “Tools” then select 4 KEY “Notepad”. 2. To add a new memo, press LEFT S.KEY [ADD]. Input a new text memo. 3. To save memo, press OK KEY [SAVE]. VIEW MEMO To view a saved memo: 1.
TOOLS CALCULATOR To access the calculator: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 1 KEY “Tools” then select 5 KEY “Calculator”. 2. Enter the number using your keypad and perform one of the following functions: • Press the navigation key right Multiplication (x). • Press the navigation key left for Division (÷). • Press the navigation key down for Subtraction (-). • Press the navigation key up for Addition (+). • Press * KEY for a decimal point.
TOOLS STOPWATCH Simultaneously times up to ten different events. To operate the stop watch: 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 1 KEY “Tools” then select 6 KEY “Stopwatch”. 2. To measure a time period: • To start, press LEFT S.KEY [START]. • To stop a time period and continue measuring another one, press RIGHT S.KEY [LAP]. • To stop the second and continue measuring a third one, press RIGHT S.KEY [LAP]. • To measure up to ten time periods, repeat the above steps.
FUN & GAMES CUTY 1. Press OK KEY [MENU], then select “Fun & Games” menu, press 1 KEY “Cuty”. Game Menu • Start: Lets start “Cuty” game. • Easy/Normal/Hard: Select the desired difficulty. • Rank: Lets you view score lank list. • Help: Lets you view game control keys. (NAVIGATION LEFT.KEY/NAVIGATION RIGHT.
CHAPTER 6 VOICE SIGNAL COMMANDS CHAPTER 6 VOICE SIGNAL COMMANDS This chapter addresses Voice signal commands functions including: VOICE SIGNAL COMMANDS 86
VOICE SIGNAL COMMANDS Voice Signal commands allow you to dial numbers, lookup contact information, and open applications using your voice. 1. In standby mode, press NAVIGATION UP.KEY, After a brief pause, “Please Say a Command” appears in the display and is pronounced through the speaker. 2. After the phone beeps, say the name of the command that you want to perform. The Voice Signal commands listed in the following table are available.
VOICE SIGNAL COMMANDS VR SETTINGS CHOICE LIST The “Choice List” setting option will allow you to choose if the Command System prompts you with a list of potential matches. “On” will always present you with a best match list of names or numbers. When multiple matches are found, the system will prompt you to choose from a list of matches. If the Choice List is set to “Off”, the voice command system will select the best match. 1.
VOICE SIGNAL COMMANDS TRAIN VOICE Train Voice is the process of optimizing the voice recognition software to your voice. Train Voice requires that you make recordings of your voice, which are then used to customize the voice recognition system. This will take a few minutes and you should be in a quiet environment for optimum training. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 8 KEY “VR Settings”. 2. 3. 4. Select 2 KEY “Train Voice”.
VOICE SIGNAL COMMANDS PROMPT The prompts settings, “Mode”, “Timeout’, and “Speed” settings will allow you to set how you are notified by the voice command system, the duration in which you can respond, and how fast the System will play the prompts to you, when in Prompts or Readout mode. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 8 KEY “VR Settings”. 2. 3. Select 3 KEY ”Prompt”. Select “Mode” or “Timeout” with the Navigation Key. • Mode: Select “Prompts” or “Ring Only”.
VOICE SIGNAL COMMANDS CALL ALERT The “Call Alert” setting control how you are notified when receiving a call. “Name + Ring” will first announce the name and then play the set ring tone. “Ring only” will play the set ring tone only. “Name Repeat” continuously, states the name or number until the call is answered or incoming call alert ends. 1. Press OK KEY [MENU], then select “Settings & Tools” menu, press 8 KEY “VR Settings”. 3. 4. Select 4 KEY ”Call Alert”. 5.
CHAPTER 7 MESSAGE CHAPTER 7 MESSAGE This chapter addresses Voice Mail, TXT Messaging functions including: NEW MSG INBOX SENT DRAFTS VOICE MAIL ERASE ALL SETTINGS 92
MESSAGE NEW MSG To send a new txt message: 1. Press OK KEY [MENU], then select “Message” menu, press 1 KEY “New Msg” or press LEFT S.KEY [MESSAGE], press 1 KEY “New Msg”. 2. Under “TO”, input the phone number. By pressing LEFT S.KEY [ADD], you can choose from the following: • Contacts: Search the phone number which is stored in the contacts list. • Groups: Search the group which is stored in the contacts list. • Recent Calls: Search the phone number which is stored in the recent calls list. 3.
MESSAGE 5. To save the TXT Message, press RIGHT S.KEY [OPTIONS], then select “Save As Draft”. Press RIGHT S.KEY [OPTIONS], then select “Priority Level”, select “High” or “Normal”, then press OK KEY. To add to phonebook, press RIGHT S.KEY [OPTIONS], then select “Add to Contacts”. 6. To send the TXT Message, press OK KEY [SEND].
MESSAGE INBOX The Inbox manages received TXT/Web Alert messages. To access: 1. Press OK KEY [MENU], then select “Message” menu, press 2 KEY “Inbox” or press LEFT S.KEY [MESSAGE], press 2 KEY “Inbox”. 2. Select a message, then press OK KEY [OPEN]. The message is displayed. To delete a message, press LEFT S.KEY [ERASE], then select “Yes” or “No”, press OK KEY. By pressing RIGHT S.KEY [OPTONS], you can choose from the following: • Forward: To forward the TXT message.
MESSAGE SENT Manages sent TXT messages waiting to be sent. 1. Press OK KEFY [MENU], then select “Message” menu, press 3 KEY “Sent” or press LEFT S.KEY [MESSAGE], press 3 KEY “Sent”. 2. Select a message, then press OK KEY [OPEN]. The message is displayed. To delete a message, press LEFT S.KEY [ERASE], then select “Yes” or “No”, press OK KEY. Resend a message, then press OK KEY [RESEND]. By pressing RIGHT S.KEY [OPTONS], you can choose from the following: • Forward: To forward the TXT message.
MESSAGE DRAFTS Draft Folder contains any draft messages or saved messages. If message composition is interrupted by a voice call or other interrupting event, the text of the current composition is automatically saved in the drafts folder. 1. Press OK KEY [MENU], then select “Message” menu, press 4 KEY “Drafts” or press LEFT S.KEY [MESSAGE], press 4 KEY “Drafts”. 2. Select a message then press OK KEY [EDIT]. (To move “New Msg” mode). 3. Press RIGHT S.KEY [OPTIONS]. By pressing RIGHT S.
MESSAGE VOICEMAIL Displays the number of voice mails and accesses them by pressing TALK KEY. FIRST TIME USER 1. 2. 3. Dial *86 then press TALK KEY [SEND]. At the recording, press SPACE KEY. To set up your account follow the voice tutorial. FIRST TIME USER 1. 2. 3. Dial *86 then press TALK KEY [SEND]. At the recording, enter your 4 digit password, then press SPACE KEY. To listen to new messages, press 1 KEY.
MESSAGE ERASE ALL 1. Press OK KEY [MENU], then select “Messaging” menu, press RIGHT S.KEY [OPTIONS] or press LEFT S.KEY [MESSAGE], press RIGHT S.KEY [OPTIONS]. 2. To erase all the inbox messages, press 1 KEY [ERASE INBOX]. To erase all the drafts messages, press 2 KEY [ERASE DRAFTS]. To erase the sent messages, press 3 KEY [ERASE SENT]. To erase all messages, press 4 KEY [ERASE All]. 3. Select “Yes”, then press OK KEY.
MESSAGE SETTINGS Manages messaging features through various features. ALL MSG Auto.save 1. Press OK KEY [MENU], then select “Messaging” menu, press LEFT S.KEY [SETTINGS] or press LEFT S.KEY [MESSAGE], press LEFT S.KEY [SETTINGS], then select 1 KEY [ALL MSG]. 2. Press 1 KEY [AUTO.SAVE]. Select “On”, “Off” or “Prompt” with the Navigation Key. • On: All sent messages saved in the Sent box. • Off: All sent messages not saved in the Sent box. • Prompt: “Yes”, “No” dialogue box displayed after sent message.
MESSAGE 3. Press OK KEY to save it. Quick.text To edit the Quick Text message you have saved: 1. Press OK KEY [MENU], then select “Messaging” menu, press LEFT S.KEY [SETTINGS] or press LEFT S.KEY [MESSAGE], press LEFT S.KEY [SETTINGS], then select 1 KEY [ALL MSG]. 2. Press 3 KEY [QUICK TEXT]. Select a message from the list. Press OK KEY. To add a new Quick Text message, press RIGHT S.KEY [OPTIONS] to select “Add New”. To edit the Quick Text message you have selected, press RIGHT S.
MESSAGE Voicemail # Automatically erases inbox messages when new messages arrived. 1. Press OK KEY [MENU], then select “Messaging” menu, press LEFT S.KEY [SETTINGS] or press LEFT S.KEY [MESSAGE], press LEFT S.KEY [SETTINGS], then select 1 KEY [ALL MSG]. 2. Press 4 KEY [VOICEMAIL#]. Input a new voice mail number or edit voice call back number. Press OK KEY to save it. 3. Entry mode Sets an Entry Mode as a default. For example, if T9 Mode is the default, its icon will appear. 1.
MESSAGE Callback # Edits a default callback number so that the recipient can callback or reply. 1. Press OK KEY [MENU], then select “Messaging” menu, press LEFT S.KEY [SETTINGS] or press LEFT S.KEY [MESSAGE], press LEFT S.KEY [SETTINGS], then select 1 KEY [ALL MSG]. 2. Press 6 KEY [CALLBACK#]. Input a new callback number. 3. Press OK KEY to save it. Signature Create a signature that can be automatically inserted at the end of a message. 1.
MESSAGE TXT MSG Auto view If the “Auto View” is set to on, the user will be able to view the message. If the “Auto View” is set to off, the user can view the message by entering SMS Menu-> Inbox. 1. Press OK KEY [MENU], then select “Messaging” menu, press LEFT S.KEY [SETTINGS] or press LEFT S.KEY [MESSAGE], press LEFT S.KEY [SETTINGS], then select 2 KEY [TXT MSG]. 2. Press 1 KEY [AUTO VIEW]. Select “On” or “Off” with the Navigation Key. • On: Text message displayed automatically.
MESSAGE Block/unblock 1. Press OK KEY [MENU], then select “Messaging” menu, press LEFT S.KEY [SETTINGS] or press LEFT S.KEY [MESSAGE], press LEFT S.KEY [SETTINGS], then select 2 KEY [TXT MSG]. 2. Press 2 KEY [BLOCK/UNBLOCK]. Select “Block”, “Unblock” or “View List of Blocked Addresses” with the Navigation Key. • Block: Enter the address to block. • Unblock: Enter the address to remove from block. • VIEW LIST OF BLOCKED ADDRESSES: Display the blocked. 3. Press OK KEY to save it.
CHAPTER 8 SAFETY AND WARRANTY CHAPTER 8 SAFETY AND WARRANTY This chapter addresses the safety guidelines and precautions to follow when operating your phone. Before operating your phone, please be aware of all the safety details. This chapter contains the terms and conditions of services and the warranty for your phone. Please review them thoroughly.
SAFETY AND WARRANTY SAFETY INFORMATION FOR WIRELESS HANDHELD PHONES Read This Information Before Using Your Handheld Portable Cellular Telephone EXPOSURE TO RADIO FREQUENCY SIGNALS Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones.
SAFETY AND WARRANTY DRIVING SAFETY Talking on the phone while driving is extremely dangerous and is illegal in some states. Remember, safety comes first. Check the laws and regulations on the use of phones in the areas where you drive. Always obey them. Also, if using your phone while driving, please: • Give full attention to driving. Driving safely is your first responsibility. • Use hands-free operation, if available.
SAFETY AND WARRANTY PACEMAKERS The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers : • ALWAYS keep the phone more than six inches from your pacemaker when the phone is turned on.
SAFETY AND WARRANTY AIRCRAFT FCC and Transport Canada Regulations prohibit using your phone while in the air. Turn your phone OFF before boarding an aircraft. BLASTING AREAS To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and instructions. POTENTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions.
SAFETY AND WARRANTY PRECAUTIONS Your Handheld Portable Telephone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on (1) AC Adaptor (2) Battery and (3) Product Using Battery. • DO NOT use this equipment in an extreme environment where hightemperature or high humidity exists. • DO NOT abuse the equipment. Avoid striking, shaking or shocking. When not using, lay down the unit to avoid possible damage due to instability.
SAFETY AND WARRANTY SAFETY INFORMATION FOR FCC RF EXPOSURE WARNING! Read this Information before using CAUTIONS In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
SAFETY AND WARRANTY BODY-WORN OPERATION This device was tested for typical body-worn operations with the back of the phone kept 2.0 cm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 2.0 cm. separation distance between the user’s body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly.
SAFETY AND WARRANTY SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
SAFETY AND WARRANTY The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.35W/Kg and when worn on the body, as described in this user guide, is 1.19W/Kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements).
SAFETY AND WARRANTY FCC HEARING-AID COMPATIBILITY (HAC) REGULATIONS FOR WIRELESS DEVICES On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities.
SAFETY AND WARRANTY M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. The hearing aid and wireless phone rating values are then added together.
SAFETY AND WARRANTY For information about hearing aids and digital wireless phone: • Fcc Hearing Aid Compatibility and Volume Control http://www.fcc.gov/cgb/dro/hearing.html • GallaudetUniversity,RERC http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm • Self Help for Hard of Hearing People Inc. [SHHH] www.hearingloss.org/hat/TipsWirelessPhones.htm • The Hearing Aid Compatibility FCC Order http://hraunfoss.fcc.gov/edocs_public/attachmatch/ FCC-03-168A1.
SAFETY AND WARRANTY FDA CONSUMER UPDATE U.S. Food and Drug Administration -Center for Devices and Radiological Health Consumer Update on Wireless Phones 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used.
SAFETY AND WARRANTY Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following: • Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and Cooperate in providing users of wireless phones with the best possible information on possib
SAFETY AND WARRANTY The National Institutes of Health participates in some inter-agency working group activities, as well. FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon.
SAFETY AND WARRANTY 4. What are the results of the research done already? The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories.
SAFETY AND WARRANTY 5. What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists.
SAFETY AND WARRANTY and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.
SAFETY AND WARRANTY 8. What has FDA done to measure the radiofrequency energy coming from wireless phones ? The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers.
SAFETY AND WARRANTY • If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful.
SAFETY AND WARRANTY 11.What about wireless phone interference with medical equipment? Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI).
SAFETY AND WARRANTY 12.Where can I find additional information? For additional information, please refer to the following resources: • FDA web page on wireless phones (http://www.fda.gov/cdrh/ phones/index.html) • Federal Communications Commission (FCC) RF Safety Pro-gram (http://www.fcc.gov/oet/rfsafety) • International Commission on Non-Ionizing Radiation Protec-tion (http://www.icnirp.de) • World Health Organization (WHO) International EMF Project (http://www.who.
SAFETY AND WARRANTY MANUFACTURER’S WARRANTY 12 MONTH LIMITED WARRANTY UTStarcom Personal Communications (the Company) warrants to the original retail purchaser of this Audiovox handheld portable cellular telephone, that should this product or any part thereof during normal consumer usage and conditions, be proven defective in material or workmanship that results in product failure within the first twelve (12) month period from the date of purchase, such defect(s) will be repaired or replaced (with new or re
SAFETY AND WARRANTY (f) Product damaged from external causes such as fire, flooding, dirt, sand, weather conditions, battery leakage, blown fuse, theft or improper usage of any electrical source. The Company disclaims liability for removal or reinstallation of the product, for geographic coverage, for inadequate signal reception by the antenna or for communications range or operation of the cellular system as a whole.
SAFETY AND WARRANTY In addition, for reference to an authorized Warranty station in your area, you may telephone in the United States (800) 229-1235, and in Canada (800) 465-9672 (in Ontario call 905-712-9299). THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LAIBILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
SAFETY AND WARRANTY IN USA: UTStarcom/Audiovox Communications 555 Wireless Blvd.
