User's Manual

Clock Application
78
- The tens digit for the minute and second field is restricted so that no
entry above "6" is permitted
- Press
to reset the previous character to zero. Press to
return to idle state and no changes are saved to the countdown
duration
4. To save the countdown, press the left soft key
(Save)
- If the master volume is set to “Off + Vibrate”, “Alarm will not sound
in Vibrate mode” appears
- If the master volume is set to “Off” or the ringer volume is zero,
“Alarm will not sound in Silent mode” appears
11.3.1.2 When Countdown Value is not Zero
If the duration of the countdown is not zero, you can reset the duration to
zero or change the ring tone by observing the following steps:
1. After accessing the Clock application, select Countdown
2. Press the right soft key
(Options) to reset the countdown value to
zero or to change the ring tone
- When Reset is highlighted, press
to reset the countdown
duration to zero. Refer to "When Countdown Value is Zero” on page
48 for additional information
- When Ring Tone is highlighted, press
or to assign a
custom ring tone to play when the countdown time has elapsed
11.3.2 Start /Stop the Countdown
When the countdown duration is set, press the left soft key
(Start) to
start the countdown. When a countdown is running. the annunciator
is displayed until the event has expired