User's Manual

Clock Application

11. CLOCK APPLICATION

This application enables you to set the alarms for a specified time, and

use timer and countdown functions

To access the clock application from the idle state, press

to access

main menu, then select Clock

~ Note: This function requires network support. If you are in places

where no digital signal is available, a note stating “A signal is

required for this application to begin” will display

11.1 Alarm Clock

This function enables you to activate/deactivate and review alarms for

specified time. Up to three alarms can be set. Once an alarm is activated,

the alarm annunciator

will be displayed

z When the preset alarm time expires, the phone will sound the alarm

ringer and a note with the “Alarm” title will appear. The body of the

note contains the time. The alarm will sound for two minutes and the

note will remain on the screen until you dismiss it

z If the ringer volume is zero, or the master volume is “Off”, no alarm

ringer will be played but the "Alarm" note will be displayed when the

preset alarm time expires; if the master volume is “Off + Vibrate”, the

phone will vibrate; if the master volume is "On + Vibrate", the phone

will first vibrate and then play the ring tone

z Press the left soft key

(Dismiss) or to silence the alarm

and return to the state in which the note appeared. When the keypad

is locked, you still can press the left soft key

(Dismiss) or

to silence the ring tone and dismiss the note