User's Manual

Basic Operations
23
application. Refer to "Ringer Volume” on page 48 for details
2.11 Master Volume Control
This function enables you to define how the phone will notify you of events
such as incoming calls, new messages/pages and alarm, countdown,
notes, and so on. Master volume affects all sounds except for voice
To change the master volume:
1. Press and hold
from idle state. A check mark appears on the
current setting
2. To select the desired option, press
- If the master volume is set to “Off”,
is displayed; if the volume is
changed from off to on, the annunciator is hidden (unless the ringer
volume is set to zero, in which case it stays on). If the master
volume is set to “On + Vibrate” or “Off + Vibrate”,
appears; if
vibrate is changed from on to off, then the annunciator is hidden
- The following options are available:
On: The phone will play sounds for events
Off: The phone will neither play sounds nor vibrate for eventsOn +
Vibrate: The phone will first vibrate and then play sounds for events
Off + Vibrate: The phone will vibrate for events
3. Press
to complete the setting
~ Note: You can also access the master volume control from Settings
application. Refer to “Master Volume” on page 48 for details