User's Manual

Basic Operations

z When Keyguard is activated, you can still answer a call as usual.

During the call, you can operate the phone normally. However, the

Keyguard will automatically be activated when the call ends or if the

call is rejected

z The Keyguard state can also be invoked from auto keyguard, a feature

set in the Settings application. Auto keyguard allows you to set a

trigger time for Keyguard to automatically activate (see “Auto

Keyguard” on page 48)

2.10 Ringer Volume Control

Ringer volume controls currently selected ring tones and certain

notification sounds played through the speaker. It excludes voice played

through the speaker

To adjust the ringer volume,

1. In idle state, press

2. There are eight volume levels. Press

to increase or to

decrease the volume. As you adjust the volume levels(non-zero), you

can press the left soft key

(Play) to play the current selected

default ring tone and the soft key’s label changes to Silence

z When the volume is set to zero, the silent annunciator

is shown

on the annunciator row; if the annunciator was previously displayed

and the volume has been changed, the annunciator disappears

z If the volume is at the highest level, the volume level will not change

when

is pressed; if the volume is zero, the volume level will not

change when

is pressed

3. After completing the volume selection, press

, or or

wait for four seconds to return to idle state. The adjusted volume level

will be saved

~ Note: You can also access the ringer volume control from Settings