Instructions / Assembly
Pg 7 of 7
C
F
7.
Making sure the end cap (C) is in the upright
position with the screw hole closest to the
wall (in the neck of the endcap) is on top,
fasten the endcap (C) to the side wall.
NOTE
: Screw hole closest to the wall in the
“neck” of the endcap is on top, as shown.
Repeat for the other end cap (C).
Then fasten the tube asembly to the
endcaps (C) using allen wrench (H),
as shown.
8.
C
C
E
E
E