Instructions / Assembly

Pg 9 of 15
11.
H
NOTE: Be sure to orient these parts so that
the hole in the long “L” shaped tube (A)
is on the bottom of the assembly.
Mark mounting points on wall through
holes in metal flanges (I).
NOTE: If a mounting screw (S) will be
going directly into a stud, an anchor (T)
should not be used.
Use a 1/4 in. (6 mm)
drill bit for drywall anchor installation. Use
a 5/64 in. (2mm) drill bit for direct stud
installation. If installing into a material
other than drywall or into stud, consult
a professional for proper installation.
If installing into a material other than
drywall or into stud, consult a professional
for proper installation.