Instructions / Assembly

Pg 6 of 15
6.
G
O
L
7.
G
O
L
Unscrew large screw (O), leaving
metal insert (L) inside the tube. Repeat,
using other cut flared tube (G).
Holding large screw (O) and using a
hammer, gently tap the head of the
screw to drive metal insert (L) into a
flared tube (G). IMPORTANT
: Metal insert
(L) must be inserted in the tube between
5/8 in. and 3/4 in. DO NOT INSERT THE
METAL INSERT MORE THAN 3/4 in.
NOTE
: Use the screw to gauge that metal
insert (L) is going into the tube straight.
You can straighten the metal insert by
gently straightening the screw.
Repeat using other large screw (O),
metal insert (L) and flared tube (G).