Instructions / Assembly

Pg 4 of 15
3.
4.
G
distance minus 1/8 in.
discard this end
IMPORTANT:
Be sure to subtract 1/8 in. to the measurement
from step 3. Before you cut, make sure you
measured from the
flared-end of the tube.
Subtract 1/8 in. from the measurement in
step 3. Measuring from the flared-end of
the tube, mark this measurement on
flared tubes (G). Using a hacksaw, cut
flared tubes (G) at the mark.
NOTE: Before you cut, make sure you
measured from the flared-end of the
tube.
Measure distance from long “L” shaped
tube (A) to wall.
cut here
A
measure this distance
distance minus 1/8 in.