Instructions / Assembly

Pg 14 of 15

21.

20.

Using mounting screws (S), attach closed metal

flange (I) to

the ceiling, as shown.

NOTE: If you screw directly into studs, anchors

(T) are not necessary.

Slide short tube with hole (E) and closed metal flange

(I) up to the ceiling. Mark mounting points on ceiling

through holes in metal flange (I).

NOTE: If a mounting screw (S) will be going directly

into wood, an anchor (T) should not be used. If an

anchor (T) will be used, use a 1/4 in. (6mm) drill bit for

drywall anchor installation. Use a 5/64 in.(2mm) drill

bit for direct stud installation. If installing into a

material other than drywall or into stud, consult a

professional for proper installation.