Instructions / Assembly

MASTER CONTRACT: 263865
REPORT: 70030918
PROJECT: 80056731
Page No: 8
Date Issued: September 30, 2020
DQD 507.10 Rev 2020-07-02 © 2020 CSA Group. All rights reserved.
DESCRIPTION
Notes:
1. Component Substitution
a) Critical components (those identified by mfr name, cat no), which are NOT identified with either
"INT" or "INT*" are not eligible for substitution without evaluation and report updating
b) The term "INT" means a "Certified" and/or "Listed" (or a "Recognized" and/or "Accepted")
component may be replaced by one "Certified" and/or "Listed" by another certification organization
accredited by the appropriate accreditation body or scheme requirements to the correct standard, for
the same application; providing the applicable country identifiers are included and requirements in
item "d" below are complied with.
c) The Term "(INT*)" means a "Recognized" and/or "Accepted" component may be replaced by a
component that is CSA Certified. The applicable country identifiers shall be included, the
requirements in item "d" below as well as any "conditions of suitability" for the component (as
recorded in this descriptive report) shall be complied with;
d) Components which have been substituted, must be of an equivalent rating, configuration (size,
orientation, mounting) and the applicable minimum creepage and clearance distances are to be
maintained from live parts to bonded metal parts and secondary parts.
e) Substitution of a "Certified" and/or "Listed" component with a component that is "Recognized" or
"Accepted" is not permitted without evaluation and report updating.
f) Substitution of a "Recognized" and/or "Accepted" component by one that is not CSA Certified is not
permitted without a proper evaluation as well as a report update because the Conditions of
Acceptance of the original component may be different than the Conditions of Acceptance of the
substitute component.
Models listed in PRODUCTS part all use 20lb cylinder as fuel supply. The cylinder is store inside the fireplace
during operation except G-FP-71853C and GFT-30044, which connect to remote LP cylinder at least 20” away
from it according to manufacturer instruction. All models have no wheels.
Burner Media – Lava Rock Weight
Models using 480mm*480mm square fire bowl 5.0kg
Models using 514mm*514mm square fire bowl 5.0kg
Models using 380mm*380mm square fire bowl 2.4kg
Models using 420mm*420mm square fire bowl 2.4kg
G-FTB51032/G-FTB51059/G-FTB51015BD/G-FP-71853C/ 4.0kg
G-FTB-L-A02FT08/GFT-10513R/GFT-10667/GFT-31741/
GFT-31756/GFT-31757
Burner Media – Glass Bead Weight
Models using 480mm*480mm square fire bowl 8.0kg
Models using 514mm*514mm square fire bowl 8.0kg
Models using 380mm*380mm square fire bowl 5.0kg
Models using 420mm*420mm square fire bowl 5.0kg
G-FTB51032/G-FTB51059/G-FTB51015BD/G-FP-71853C/ 6.0kg
G-FTB-L-A02FT08/GFT-10513R/GFT-10667/GFT-31741/
GFT-31756/GFT-31757
GFT-97010/GTF-10149/GFT-15035/ GFT-93062/9710/9632/ 6.5kg
GFT-80108/GFT-31202/GFT-61358/GFT-97032/GFT-31567
Burner Media – Glass Rock
Models using 480mm*480mm square fire bowl 8.0kg
Models using 514mm*514mm square fire bowl 8.0kg