Instructions / Assembly

MASTER CONTRACT: 263865

REPORT: 70030918

PROJECT: 80056731

Page No: 44

Date Issued: September 30, 2020

The glass panels used on model GFT-97010 and GFT-93062 are to be removed.

The clearances to combustible ceiling and walls for all models are reduced to 64”.

GFT-80108, GFT-31202 and GFT-61358 are new models extended from model GFT-97010 except appearances

are different, which will not affect the test results.

Model GFT-60640 added in project 70207528 is changed as GFT-60640A.

According to above reasons, typical models GFT-60640 and GFT-97010 are chosen as typical models for below

tests and satisfactory result was found:

ANSI Z21.97-2017 / CSA 2.41-2017 Outdoor Decorative Gas Appliances

Section 1 Scope

Section 4 Construction -partial

Section 5 Performance

5.1 General

5.2 *Test Gases

5.3 *Test pressures and burner adjustments

5.4 *Combustion

5.5 *Burner operating characteristics

5.6 Pilot operating characteristics – NA, no Pilot.

5.7 Automatic gas ignition systems – NA, not used

5.8 Direct ignition systems – NA, no direct ignition systems.

5.9 *Manual ignition systems

5.10 Manual operated gas valve – Waived, use certified type.

5.11 Gas appliance pressure regulators – NA, no gas appliance pressure regulators

5.12 Automatic valves – NA, no automatic valve.

5.13 Dual cylinder manifold – NA, use one cylinder only

5.14 Manifold and gas control assembly capacity – NA, no gas appliance pressure regulators

5.15 Wall, floor and ceiling temperatures

5.16 *Rain test

5.17 *Wind test

5.18 Burner durability – Extend from report no.70030918

5.19 Glass panels – NA, no glass panels

5.20 Glass fronts – NA, no glass panels

5.21 Appliance structure – Extend from report no.70030918

5.22 Orifice and orifice fitting temperatures – Extend from report no.70030918

5.23 Burn hazard potential – NA, no glass panels

5.24 Marking material adhesion and legibility – Waived, use certified type

Note: Tests with affix “*” also conducted with Natural Gas.

Test history of Project 70170918

The following tests were conducted in:

CCIC-CSA International Certification Co., Ltd.

No. 10, Ke Yan Road

Science Park