Instructions / Assembly

MASTER CONTRACT: 263865

REPORT: 70030918

PROJECT: 80056731

Page No: 41

Date Issued: September 30, 2020

So the following tests were conducted on new construction of model GFT-10166E with use of the small burning

system, and satisfactory test results were obtained.

The following tests were conducted in:

CCIC-CSA International Certification Co. Ltd.

Guangzhou Science Park Lab, No. 10, Ke Yan Rd.,

Science Park of Guangzhou,

Guangdong,

CHINA 510000

Tests Data stored in Documentum.

ANSI Z21.97-2014 / CSA 2.41-2014 Outdoor Decorative Gas Appliances

Section 1 Scope

Section 4 Construction -partial

Section 5 Performance

5.1 General

5.2 *Test Gases

5.3 *Test pressures and burner adjustments

5.4 *Combustion

5.5 *Burner operating characteristics

5.6 Pilot operating characteristics – NA. No Pilot.

5.7 Automatic gas ignition systems – NA

5.8 Direct ignition systems – NA, no direct ignition systems.

5.9 *Manual ignition systems

5.10 Manual operated gas valve – NA, use certified type.

5.11 Gas appliance pressure regulators – NA, no gas appliance pressure regulators

5.12 Automatic valves – NA, no automatic valve.

5.13 Dual cylinder manifold – NA, use one cylinder only

5.14 Manifold and gas control assembly capacity - NA

5.15 Wall, floor and ceiling temperatures – Extended from model G-FTB-51032 of project 70030918

5.16 *Rain test

5.17 *Wind test

5.18 Burner durability

5.19 Glass panels – NA, no glass panels.

5.20 Appliance structure -Extended from model G-FTB-51057B of project 70076502.

5.21 Orifice and orifice fitting temperatures -Extended from model G-FTB-51057B of project 70076502.

5.22 Marking material adhesion and legibility – NA, permanent hanging tag.

5.27 ANSI Z21.89-2013/CSA1.18-2013 tag pulling test -Extended from model G-FTB-51057B of project

70076502.

Note: Tests with affix “*” also conducted with Natural Gas.

See main archive file for details of testing.

Construction Review: