Instructions / Assembly
MASTER CONTRACT: 263865
REPORT: 70030918
PROJECT: 80056731
Page No: 40
Date Issued: September 30, 2020
DQD 507.10 Rev 2020-07-02 © 2020 CSA Group. All rights reserved.
Section 1 Scope
Section 4 Construction -partial
Section 5 Performance
5.1 General
5.2 Test Gases
5.3 Test pressures and burner adjustments
5.4 Combustion –Extended from model G-FTB-51057B of project 70076502.
5.5 Bruner operating characteristics -Extended from model G-FTB-51057B of project 70076502.
5.6 Pilot operating characteristics – NA. No Pilot.
5.7 Automatic gas ignition systems – NA
5.8 Direct ignition systems – NA, no direct ignition systems.
5.9 Manual ignition systems-Extended from model G-FTB-51057B of project 70076502.
5.10 Manual operated gas valve – NA, use certified type.
5.11 Gas appliance pressure regulators – NA, no gas appliance pressure regulators
5.12 Automatic valves – NA, no automatic valve.
5.13 Dual cylinder manifold – NA.
5.14 Manifold and gas control assembly capacity - NA
5.15 Wall, floor and ceiling temperatures
5.16 Rain test -Extended from model G-FTB-51057B of project 70076502.
5.17 Wind test -Extended from model G-FTB-51057B of project 70076502.
5.18 Bruner durability -Extended from model G-FTB-51057B of project 70076502.
5.19 Glass panels – NA, no glass panels.
5.20 Appliance structure -Extended from model G-FTB-51057B of project 70076502.
5.21 Orifice and orifice fitting temperatures -Extended from model G-FTB-51057B of project 70076502.
5.22 Marking material adhesion and legibility – NA, permanent hanging tag.
5.27 ANSI Z21.892013/CSA1.18-2013 tag pulling test -Extended from model G-FTB-51057B of project
70076502.
Section 6 M&P Plan Extended from report 70030918.
See main archive file for details of testing.
Construction Review:
Construction review performed with satisfactory results.
Project 70190968
This project is to update report no.70030918 to add new models GFT-10166E, GFT-10520, GFT-51030B, GFT-
30493(CO9011), GFT-30618, GFT-10234, GTF-30021, GFT-30522, GFT-30585, GFT-30603 and GFT-60597,
and add alternative smaller square burning system for these 11 models and some of the listed models. Please see
Drawings part for detail.
The five new models use the same square burning system as used on certified model G-FTB-51058D, and have
similar design, just different appearances.
The alternative small square burning system is newly design, use 5kg glass bead or 2.4kg lava rock as burning
media, and use LP and NG. But the input rate is same as 50,000Btu/hr.