ASSEMBLY INSTRUCTION 5PCS RATTAN SET WF194065 WF194066
J D A G E H F I B C Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during asembly, please loosen all the other screws to 50% and continue the assembly process. 5.
Part list A B E Table top frame (1 pc) G Stool (2 pcs) Chair leg (2 pcs) Chair seat frame (2 pcs) D C F Table leg (4 pcs) Table bottom frame (1pc) H I Back cuhion chair (2 pcs) Seat cushion chair (2 pcs) Seat cushion stool (2 pcs) J Glass table (1 pc) 2 1 Bolt M6x15 (4 pcs) 3 Bolt M6x40 (14 pcs) Allen Key M4 (1 pc)
STEP 1 (Table assembly) Connect Table leg (F) & Table top frame (D) with Bolt (1) F STEP 2 Connect part from Step 1 & Table bottom frame (E) with Bolt (2) E F 1 1 1 1 D STEP 3 Put on Glass table (J) to complete Table J
STEP 4 (Chair assembly) STEP 5 Connect Chair leg (B) & Chair Seat frame (A) with Bolt (2) Put on Chair seat cushion (H) & Chair back cushion (G) to complete Chair B G H A STEP 6 Put on Stool seat cushion (I) to complete Stool I C
STEP 7 OPTION 1 OPTION 2
