Material Safety Data Sheet

UTILITY MANUFACTURING CO., INC.
700 MAIN STREET, WESTBURY, NY 11590
[phone] - FAX # [phone]
DO-ALL+PLUS FURNACE/REFRACTORY/RETORT CEMENT
Page 2 30-1030
MATERIAL SAFETY DATA SHEET
SECTION VII - STORAGE AND SPECIAL PRECAUTIONS
HANDLING AND STORAGE PRECAUTIONS: Do not get in eyes, skin or clothing. Do not breathe vapor mist or gas. Keep
containers tightly closed, cool, dry, and away from all sources of ignition. Use and store this product with adequate ventilation.
Avoid inhalation of vapors and personal contact with the product. Use good personal hygiene practices. Bond and ground
equipment when transferring to another container. “Empty” containers contain residue (liquid and/or vapor) and can be
dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other
sources of ignition. They may explode and cause injury and death. Empty drums should be completely drained, properly
bunged, and promptly shipped to the supplier or drum reconditioner. All other containers should be disposed of in an
environmentally safe manner and in accordance with governmental regulations. Before working in or on tanks which contain or
has contained his product, refer to OSHA or ANSI Z49.1 regulations and other governmental and industrial references
pertaining to cleaning, repairing, welding, or other contemplated operations.
SECTION VIII - FIRE AND EXPLOSION HAZARD DATA
EXTINGUISHING MEDIA: Extinguish with dry chemical, CO
2
, or a universal type foam.
FIRE AND EXPLOSION HAZARD: May decompose during contact with flames, heating elements, or in combustion engines releasing
irritating gases. Container may explode if heated due to resulting pressure rise.
FIRE FIGHTING PROCEDURES: Wear appropriate protective equipment including respiratory protection as conditions warrant (see
Section IV). Stop spill/release if it can be done without risk. Water spray may be useful in minimizing or dispersing vapors and
cooling equipment exposed to heat and flame. Avoid spreading burning liquid with water used for cooling purposes.
SECTION IX - PHYSICAL DATA
APPROXIMATE BOILING POINT (DEG F): NONE PER CENT VOLATILE: NONE
SPECIFIC GRAVITY (68 F): >1 FLASH POINT (TCC, DEG F): NONE
RELATIVE EVAPORATION RATE (ESTIMATED): <1 PER CENT SOLUBILITY IN WATER: <10
VAPOR PRESSURE @20C mmHg (CALCULATED): <1
SECTION X - OTHER REGULATORY DATA
SARA HMIS
SECTION 302: NONE Health: 0
SECTION 311 & 312: NONE Flammability: 0
SECTION 313: See Section I.I Reactivity: 0
TSCA
All components are in full compliance CALIFORNIA PROPOSITION 65
with the TSCA inventory. NOT LISTED
RCRA CERCLA
NOT REGULATED NOT REGULATED
CARCINOGENICITY:
NOT LISTED with NTP or IARC.
NOTICE
The supplier disclaims all expressed or implied warranties of merchantability or fitness for a specific use, with respect to the product or the information
provided herein, except for conformation to contracted specifications. All information appearing herein is based upon data obtained from manufactures
and/or recognized technical sources. While the information is believed to be accurate, we make no representations as to its accuracy or sufficiency.
Conditions of use are beyond our control, and therefore users are responsible for verifying the data under their own operating conditions to determine
whether the product is suitable for their particular purposes and they assume risks of their use, handling, and disposal of the product. Users also assume all
risks in regards to the publication or use of, or reliance upon, information contained herein. This information relates only to the product designated herein,
and does not relate to its use in combination with any other material or process.