Owner’s Manual Model AL6096, ALF6096 Read the owner’s manual completely before you assemble and use the trailer. R Trailer Owner’s Manual © 2012 Trailers Intl, LLC. All Rights Reserved.
IMPORTANT SAFETY CHECK LIST PLEASE NOTE: Trailers are not generally used every day. A trailer may sit for extended periods of time between uses. IMPORTANT: Check all components thoroughly on the trailer before use Make sure that the towing vehicle and the hitch on your vehicle is more than capable of towing the trailer. It is important to check your vehicle owner’s manual for trailer ratings. Make sure the hitch is properly secured to the ball of the towing vehicle.
WARNING!!! DO NOT ABUSE THE TRAILER. The trailer performance is best if you follow the guidelines set fourth in this manual. Do not force the trailer to do a job it is not designed for. Know your trailer; learn its limitations and applications. • KEEP CHILDREN AWAY. Be sure children are kept a safe distance from the trailer operating area. • NEVER sit or ride on the trailer. Serious injury or death could occur.
PARTS LIST (See Figure #1) No.
-4Subject To Change Without Notice
BOLT TORQUE SPECIFICATIONS PLEASE NOTE: All bolts should be properly tightened on your trailer. To properly transport your trailer the torque specification for key components are given below. Please refer to diagram #2 and the parts list located on page 5 and 6 to identify the items referenced.
WIRING DIAGRAM B Y W G W 3 G B B Y B B B B B W Y B B B G Y -6Subject To Change Without Notice B
LOADING THE TRAILER A. B. C. D. Distribute the weight evenly on the bed of the trailer. Center the load over the axle, keeping about 10% of the weight on the tongue. Center the load from side to side. Always secure your cargo into the trailer properly and in compliance to local laws. CAUTION: Do not build your trailer load higher than 3’. Higher loading will affect trailer handling due to increased wind resistance. This may cause violent movements, accidents and serious injury.
TRAILER COUPLER ITEM # 1 2 3 4 5 DESCRIPTION 2” Trailer Coupler Locking Handle Channel Lock Adjustment Nut 2” Trailer Ball (Not Included) To adjust coupler to ball: Set coupler and tongue on to the 2" trailer ball on your vehicle. Raise the locking lever, push up on channel lock and turn nut to tighten or loosen the coupler. Proper adjustment is obtained when coupler is as tight as possible on the ball and locking lever can still be opened and closed.
CERTIFICATE OF ORIGIN -9Subject To Change Without Notice
WARRANTY REGISTRATION To validate your UtilitySport® warranty, please register online at www.utilitysport.com or fill out this form completely and mail immediately along with a copy of your purchase receipt.
