Cut Sheet

7
Load Break Tools
p.828.323.8914 f.828.323.8410
www.utilitysolutionsinc.com
6
Load Break Tools
COMPARISON LOAD-RANGER
®
USLR-XLT -1
COMPETITION LOAD-RANGER
®
USLR-XLT -2
COMPETITION
MAXIMUM VOLTAGE 27 kV 27 kV 27 kV - 38 kV 27 kV - 38 kV
MAXIMUM AMPERAGE 900 AMP 900 AMP 900 AMP 900 AMP
WEIGHT 4 lb 3 oz 5 lb 6 oz 4 lb 12 oz 6 lb
COUNTER AVAILABLE
OPTIONAL MANDATORY OPTIONAL MANDATORY
METAL TO METAL CLEARANCE
DURING STROKE
(FLASH-OVER RESISTANCE)
8.2” EST 7.1” EST 12.2” EST 10” EST
RESET FUNCTION
UNIQUE SIDE
LOCATION
NO PINCH DESIGN
TOP LOCATION
UNIQUE SIDE
LOCATION
NO PINCH DESIGN
TOP LOCATION
USLR-XLT-1 UP TO 27 kV RATED, 900 AMP WITH COUNTER
USLR-XLT-2 27 kV - 38 kV RATED, 900 AMP WITH COUNTER
Lightweight, User-Friendly Portable Load Break Tool
USLR-XLT-2
LOAD-RANGER
®
USLR-XLT
HOW TO ORDER:
USLR-XLT-1
add “E”
for Extended Hood
OPTIONS
The XLT line is offered with numerous
options including a Pad Mount
version, hard case, soft case,
extended insulated hood, and an
economical non-counter version.
Most Common Versions:
USLR-XLT-1-H LOAD-RANGER
®
XLT Load Break Tool,
27 kV RATED, 900 AMP WITH COUNTER AND HARD
CASE
USLR-XLT-2-H LOAD-RANGER
®
XLT Load Break Tool,
27 kV -38 kV RATED, 900 AMP WITH COUNTER AND
HARD CASE
The Pad Mount option “P” uses a
uniquely designed operating arm
that creates a lower prole to provide
maximum clearance for the tight
connes in pad gear. This option also
comes standard with an extended
insulated hood.
add “NC”
for No Counter
add “S”
for Soft Case
add “H”
for Hard Case
LIGHT
Weighing under 5 pounds,
the XLT line of Load Break
Tools are by far the lightest
portable load break tools
available in the world. The
XLT-1 is approximately
1 lb 3 oz lighter than the
competition. Tool weight
becomes extremely
important when the tool
is attached to the end of
a berglass operating
stick. The lighter the
better for optimum
tool control and
minimal operator
fatigue.
EASY
The XLT line was designed to be user
friendly and simple to operate. It incorporates
an optional counter and a unique reset button
located on the side which allows full tool
reset without glove removal. This results in NO
MORE PINCHED FINGERS. Spare parts are
readily available and inspection and maintenance
procedures are easy to follow.
SAFE
The Utility Solutions
XLT product line
has the highest
measured metal-
to-metal clearance
of any load break
tool. This greatly
reduces ash-over
potential during
operation.
LOAD-RANGER
®
USLR-XLT
USLR-XLT-1
LOAD-RANGER
®
XLT Load Break Tool