Cut Sheet

16
Overhead Distribution
p.828.323.8914 f.828.323.8410
www.utilitysolutionsinc.com
HOW TO ORDER:
The patented Grab-It™
offers a simple and economical
method to safely remove or install
overhead fuse barrels. The Grab-It™
design provides positive control of the fuse barrel even in high wind conditions to
prevent accidental drops. No need to nd the fuse barrel pull ring or lifting eye which
is difcult in low lighting conditions. Simply sweep
behind the fuse barrel and lift. The Grab-It™ works
as well at the end of a 50
ft telescopic as it does at
the end of an 8 ft bucket
stick. Requires no special
stick movement or
procedure to operate.
The Grab-It™ is
machined from aircraft
grade aluminum to
provide years of trouble
free operation. The Grab-
It™ has no moving parts,
no springs and no plastic
parts to break.
GRAB-IT
Grab-It™ GRAB-IT
GRAB-IT-1
GRAB-IT-1
100 AMP CUTOUT FUSE TUBE REMOVER
GRAB-IT-2
100 & 200 AMP CUTOUT FUSE TUBE REMOVER
GRAB-IT-3
SMU-20 CUTOUT FUSE TUBE REMOVER
GRAB-IT-1 GRAB-IT-2 GRAB-IT-3
FUSE TUBES 100 AMP 100 & 200 AMP SMU-20
DIMENSIONS 4.5” x 4.5” x 4” 4.5” x 4.5” x 4” 6” x 4.5” x 4”
WEIGHT 11 oz 11 oz 15 oz
GRAB-IT-3
Works well on a 50 ft telescopic
or an 8 ft bucket stick.
*add “F” for Hi Visibility
Grab-It™ Cutout Fuse Tube Remover