Installation Guide

trim

housing

1. Turn power off.

2. In housing, loosen wing nut and adjust height of socket plate as required.

3. Position trim in place.

4. Place coil springs into the slots holes inside the housing.

5. Using a pencil or other similar device (not included), push springs up

into key slot holes.

Printed in China

#0409542

IMPORTANT SAFETY INSTRUCTIONS

MOUNTING

ITEM NUMBER

Utilitech & UT Design® and Grounded in

Quality® are registered trademarks of LF,

Trim Installation Instructions

BRAND/MANUFACTURER COMPATIBLE

UTILITECH

JUNO

HALO

#0409545

#0409544

IC22

IC22R

H7ICT

H7ICAT

HTRICT

H7RICAT

PAGE 1
BRAND/MANUFACTURER UTILITECH JUNO Utilitech & UT Design® and Grounded in Quality® are registered trademarks of LF, LLC. All rights reserved. HALO COMPATIBLE #0409545 #0409544 IC22 IC22R H7ICT H7ICAT HTRICT H7RICAT Trim Installation Instructions ITEM NUMBER #0409542 IMPORTANT SAFETY INSTRUCTIONS MOUNTING housing trim 1. Turn power off. 2. In housing, loosen wing nut and adjust height of socket plate as required. 3. Position trim in place. 4. Place coil springs into the slots holes inside the housing.
PAGE 2
MARCA/FABRICANTE UTILITECH JUNO Utilitech & UT Design® y Grounded in Quality® son marcas registradas de LF, LLC. Todos los derechos reservados. HALO COMPATIBLE #0409545 #0409544 IC22 IC22R H7ICT H7ICAT HTRICT H7RICAT Instrucciones para la instalación de los rebordes NÚMERO DE ARTÍCULO #0409542 INSTRUCCIONES IMPORTANTES DE SEGURIDAD PARA EL MONTAJE carcasa reborde 1. Desconecte la alimentación 2.