ITEM #0794078 TV WALL MOUNT MODEL #UT70C Español p. 16 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-602-674-1000, 8 a.m. - 5 p.m., MST, Monday - Friday.
PACKAGE CONTENTS B A D B C C D PART DESCRIPTION A Mounting arm B End cap C Monitor adapter A E QUANTITY 1 2 2 PART DESCRIPTION D Monitor adapter B E Monitor plate (pre-assembled to Mounting arm (A)) 2 QUANTITY 2 1
HARDWARE CONTENTS (shown actual size) AA BB CC DD M4 x 12 Screw Qty. 4 M5 x 12 Screw Qty. 4 M6 x 15 Screw Qty. 4 M8 x 15 Screw Qty. 4 EE FF GG HH II JJ Anchor Qty. 2 8 mm Lag bolt Qty. 2 M4 x 30 Screw Qty. 4 M5 x 30 Screw Qty. 4 M6 x 30 Screw Qty. 4 M8 x 30 Screw Qty. 4 KK LL MM NN OO PP Square washer Qty. 4 5 mm Spacer Qty. 4 10 mm Spacer Qty. 4 Steel washer Qty. 8 Phillips screw Qty. 8 Mounting arm screw (preassembled to Mounting arm (A)) Qty.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO PERSONAL PROPERTY, OR VOIDING OF FACTORY WARRANTY. •D O NOT attempt to install or assemble this product if the product or hardware is damaged or missing.
SPECIFICATIONS Dimensions and Mounting Configurations 5
ASSEMBLY INSTRUCTIONS 1 x2 NN Steel washer Qty. 8 MM 10 mm Spacer Qty. 4 LL 5 mm Spacer Qty. 4 A 3 15.7 in. 11.8 in. 11.8 in. B B A B A B B A B A 7.9 in. 11.8 in. 15.7 in. 7.9 in. A 3.9 in. 11.8 in. 6 7.9 in. A 15.7 in. 11.8 in. 7.9 in. 7.9 in. Square washer Qty. 4 E 3.9 in. KK 2 15.7 in. 11.8 in. 7.9 in. M8 x 30 Screw Qty. 4 M6 x 30 Screw Qty. 4 M5 x 30 Screw Qty. 4 3.
FF M5 x 30 Screw Qty. 4 LL 4 x 30 Screw Qty. 4 KK Square washer EE KK M5 x 12 Screw Qty. 4 M8 x 15 Screw 4 x 12 Screw Qty. 4 DD II BB MM M4 x 12 Screw KK LL MM M4 x 30 M5 x 30 M6 x 30 Screw Screw Screw AA Qty. CC4 DD CC DD Qty. NN 4 JJ BB Qty. II4 OO NN M8 x 30 Screw II PP JJ Qty. 4DD HH OO 7 FF x4 x4 FF Anchor Qty. 2 GG HH GG 5a E KK 1 * Tip: 5 mm spacers (LL) and/or 10 mm spacers (MM) can also be used to provide clearance for cables and connectors.
Anchor Qty. 2 Anchor Qty. 2 FF GG HH KK LL MM Hardware Used * Note: 5 mm spacers (LL) or 10 mm spacers (MM) can be used depending on your TV. ** Note: Monitor plate (E) can be attached with M4 x 30 screws (EE), M5 x 30 screws (FF), M6 x 30 screws (GG), or M8 x 30 screws (HH) depending on your TV. Square 10 mm washer Spacer M5 x 30 Qty. 44 Qty. Screw Qty. 4 LL 5 mm Spacer Qty. 4 5 mm Spacer M4 x 30 Qty. 4 Screw Qty. 4 KK Square washer Qty. 4 Square washer Qty.
7. Use a stud finder (not included) to locate wood studs. Mark the edge and center locations. 5 mm Spacer Qty. 4 Wood Stud Installation Note: For concrete, proceed to step 12. Square washer Qty. 4 Square 10 mm washer Spacer Qty. Qty. 44 Steel washer KK MM KK MM OO LL NN MM PP OO 5 mm 10 mm 10arm mm Phillips Steel Square Phillips 5 mmSteel Mounting screw Spacer Spacer washer Spacer screw washer washer screw Spacer (preassembled to Qty.Qty. 4 8 Qty. Qty.4Qty. 4 8 Qty. 4 Qty. 8 Qty. 4 Qty.
ASSEMBLY INSTRUCTIONS 8. Use mounting arm (A) to mark two mounting hole locations. 8 1 A 10 Hardware Used x1 OO Phillips screw Qty. 8 NN Steel washer Qty. 8 A M8 x 30 Screw Qty. 4 HH M8 x 15 Screw Qty. 4 10 1 II 8 mm Lag bolt Qty. 2 8 mm Lag bolt II DD 2 PP JJ Anchor Qty. 2 10. Mount top of mounting arm (A) using 8 mm lag bolt (II) with a 1/2 in. socket wrench (not included). II 9 Mounting arm screw (preassembled to Mounting arm (A)) Qty. 2 9. Drill two 7/32 in.
Hardware Used 2 x1 8 mm Lag bolt Qty. 2 OO A Phillips screw Qty. 8 8 mm Lag bolt II II 11 PP JJ Anchor Qty. 2 11. Make sure mounting arm (A) is level, then secure bottom of mounting arm (A) using 8 mm lag bolt (II). Mounting arm screw (preassembled to Mounting arm (A)) Qty. 2 ASSEMBLY INSTRUCTIONS 1 NN MM 1 10 mm Spacer Qty. 4 12 Steel washer Qty. 8 M8 x 30 Screw Qty. 4 HH GG CC Concrete Installation 12. Use mounting arm (A) to mark two mounting hole locations. M6 x 30 Screw Qty.
1 NN OO 8 mm Lag bolt Qty. 2 15 2 x1 II A 10Mounting mm arm Steel screw Phillips Mounting arm screw Spacer (preassembled washer to screw (preassembled to Qty. Mounting 4 arm Qty. (A))8 Qty. 8 Mounting arm (A)) Qty. 2 Qty. 2 Square 5 mm 10 mm Steel Phillips washer Spacer Spacer washer screw Qty. 4 Qty. 4 Qty. 4 Qty. 8 Qty. 8 MM LL M8PP x 30 Screw Qty. 4 1 KK Screw Qty. 4 M6 x 30 OO Screw Qty.
ASSEMBLY INSTRUCTIONS Final Installation 17. Snap end caps (B) onto top and bottom of mounting arm (A). 17 18. Place mounting plate (E) onto mounting arm (A). 18 A B E A 19. Secure mounting plate (E) to mounting arm (A) with the two previously removed mounting arm screws (PP). E A x2 13 2 1 Phillips screw Qty. 8 PP Mounting arm screw OO PP 8 mm Lag bolt Qty. 2 Anchor Qty. 2 Hardware Used Mounting arm screw (preassembled to Mounting arm (A)) Qty.
ASSEMBLY INSTRUCTIONS Post Installation Level 20. If needed, flat panel can be leveled +/– 3 degrees. 20 ± 3° Note: Leveling will be difficult if mounting arm screws (PP) are too tight. 1 21 Adjust Tilt 21. Adjust TV to desired tilt and hold in place. Rotate handle clockwise as far as possible. Pull handle out and rotate counterclockwise as far as possible. Repeat until tight. 1 To loosen, reverse the above step.
WARRANTY This product is covered against defects in materials and workmanship for 5 years. The manufacturer will repair or replace the defective component or product, at its sole discretion. Failure to follow product care instructions from the manufacturer will void the warranty. To obtain warranty service, contact customer service at 1-602-674-1000. You must supply a copy of your original receipt. If your product must be shipped for inspection, you will be responsible for the shipping charges.
ARTÍCULO #0794078 SISTEMA PARA MONTAGE DE TV EN LA PARED MODELO #UT70C ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-602-674-1000, de lunes a viernes de 8 a.m. a 5 p. m., hora estándar del Este.
CONTENIDO DEL PAQUETE B A D B C C D PIEZA DESCRIPCIÓN A Brazo de montaje B Tapa de extremo C Adaptador del monitor A E CANTIDAD 1 2 2 PIEZA DESCRIPCIÓN D Adaptador del monitor B E Placa del monitor (preensamblada en el brazo de montaje [A]) 17 CANTIDAD 2 1
ADITAMENTOS (se muestran en tamaño real) AA BB CC DD Tornillo M4 x 12 Cant. 4 Tornillo M5 x 12 Cant. 4 Tornillo M6 x 15 Cant. 4 Tornillo M8 x 15 Cant. 4 EE FF GG HH II JJ Ancla de expansión Cant. 2 Tirafondo de 8 mm Cant. 2 Tornillo M4 x 30 Cant. 4 Tornillo M5 x 30 Cant. 4 Tornillo M6 x 30 Cant. 4 Tornillo M8 x 30 Cant. 4 KK LL MM NN OO PP Arandela de acero Cant. 8 Tornillo Phillips Cant. 8 Tornillo del brazo de montaje (preensamblado en el brazo de montaje [A]) Cant.
INFORMACIÓN DE SEGURIDAD Lea y comprenda por completo este manual antes de intentar ensamblar, utilizar o instalar el producto. ADVERTENCIA • NO LEER, COMPRENDER COMPLETAMENTE O SEGUIR TODAS LAS INSTRUCCIONES PUEDE PROVOCAR LESIONES PERSONALES GRAVES, DAÑOS A LA PROPIEDAD PERSONAL O LA ANULACIÓN DE LA GARANTÍA DE FÁBRICA. •N O intente instalar o ensamblar el producto si este o los aditamentos están dañados, o si falta algún aditamento.
ESPECIFICACIONES Dimensiones y configuraciones de montaje 400 mm (15,7 pulg.) 200 mm (7,9 pulg.) 100 mm (3,9 pulg.) A B B A 200 mm (7,9 pulg.) 100 mm (3,9 pulg.) 200 mm (7,9 pulg.) 300 mm (11,8 pulg.) 400 mm (15,7 pulg.) 300 mm (11,8 pulg.) 400 mm (15,7 pulg.) B 200 mm (7,9 pulg.) A B B A A B 200 mm (7,9 pulg.) 300 mm (11,8 pulg.) 400 mm (15,7 pulg.) 20 A 300 mm (11,8 pulg.) 200 mm (7,9 pulg.) 300 mm (11,8 pulg.) 200 mm (7,9 pulg.) 300 mm (11,8 pulg.
INSTRUCCIONES DE ENSAMBLAJE x2 NN Steel washer Qty. 8 MM 10 mm Spacer Qty. 4 LL 5 mm Spacer Qty. 4 A 3 400 mm 300 mm A B B A 400 mm 300 mm 200 mm 100 mm B A B A B A A B 200 mm 300 mm 400 mm 200 mm 21 200 mm 300 mm 300 mm 200 mm Square washer Qty. 4 KK E 400 mm 300 mm 200 mm M8 x 30 Screw Qty. 4 M6 x 30 Screw Qty. 4 M5 x 30 Screw Qty. 4 2 100 mm 3.
EE GG x4 22 FF HH FF HH GG E 8 mm Lag bolt Qty. 2 Anchor Qty. 2 GG KK * Sugerencia: Se pueden utilizar también espaciadores de 5 mm (LL) y de 10 mm (MM) para que haya separación entre cables y conectores. 8 mm Lag bolt Qty. 2 EE HH 5a LL o MM KK NN 2 KK MM OO LL OO MMPP LL 1 LL NN NN MM M4 x 30 M5 x 30 M8 xM6 30 xM6 M5 xM8 30x M4 30x 30M5 x 30M8 M6 x 30 30x 30 Screw ScrewScrew Screw Screw Screw ScrewScrewScrew Screw Qty. 4 Qty. 4 Qty. 4 Qty. 4 Qty.Qty. 4 4 Qty. 4 Qty. 4 Qty. Qty.
Anchor Qty. 2 Anchor Qty. 2 FF GG HH KK LL MM Aditamentos utilizados * Nota: Se pueden utilizar espaciadores de 5 mm (LL) o de 10 mm (MM) dependiendo del televisor. ** Nota: La placa del monitor (E) se puede fijar con tornillos M4 x 30 (EE), tornillos M5 x 30 (FF), tornillos M6 x 30 (GG), o tornillos M8 x 30 (HH) dependiendo del televisor. Square 10 mm washer Spacer M5 x 30 Qty. 44 Qty. Screw Qty. 4 LL 5 mm Spacer Qty. 4 5 mm Spacer M4 x 30 Qty. 4 Screw Qty. 4 KK Square washer Qty.
7. Use un detector de vigas (no se incluye) para ubicar las vigas de madera. Marque el borde y centre las posiciones. 5 mm Spacer Qty. 4 Square 10 mm washer Spacer Qty. Qty. 44 KK MM OO LL NN MM PP OO 5 mm 10 mm 10arm mm Phillips Steel Square Phillips 5 mmSteel Mounting screw Spacer Spacer washer Spacer screw washer washer screw Spacer (preassembled to Qty.Qty. 4 8 Qty. Qty.4Qty. 4 8 Qty. 4 Qty. 8 Qty. 4 Qty. 8 Mounting arm (A)) Qty. 2 LL NN Steel Mo washe (pr Qty. Mo 8 NN M8 x 3 Scre Qty.
INSTRUCCIONES DE ENSAMBLAJE 8. Utilice el brazo de montaje (A) para marcar las dos ubicaciones de los orificios de montaje. 8 1 A 9. T aladre dos orificios de 7/32 pulg. (5,6 mm) de una profundidad de 2-1/3 pulg. (60 mm) en las ubicaciones que marcó para los orificios de montaje. Tirafondo de 8 mm 8 mm Lag bolt Qty. 2 OO Phillips screw Qty. 8 NN Steel washer Qty. 8 A M8 x 30 Screw Qty. 4 HH M8 x 15 Screw Qty. 4 25 1 II x1 II DD 2 PP JJ Aditamentos utilizados II 10 Anchor Qty.
INSTRUCCIONES DE ENSAMBLAJE Mounting arm screw (preassembled to Mounting arm (A)) Qty. 2 2 PP x1 OO M8 x 15 Screw Qty. 4 HH M8 x 30 Screw Qty. 4 NN M6 x 15 Screw Qty. 4 GG M6 x 30 Screw Qty. 4 MM M5 x 12 Screw Qty. 4 FF M5 x 30 Screw Qty. 4 LL 5 mm Spacer Qty. 4 M4 x 12 Screw Qty. 4 EE M4 x 30 Screw Qty. 4 KK Square washer Qty. 4 A BB 12 Steel washer Qty. 8 DD II CC II 1 AA Instalación en concreto 12.
M5 x 12 Screw Qty. 4 FF M4 M8x x12 15 Screw Screw Qty. Qty.44 EE HH 27 1 Phillips screw Qty. 8 PP Mounting arm screw (preassembled to Mounting arm (A)) JJ A 2 A II Steel washer Qty. 8 1 10 mm Spacer Qty. 4 OO 1 5 mm Spacer Qty. 4 2 II Mounting arm screw (preassembled to Mounting arm (A)) Qty. 2 NN Anchor Qty. 2 JJ 14 Square washer Qty. 4 Phillips screw Qty. 8 x1 10Mounting mm arm Steel screw Spacer (preassembled washer to Qty. Mounting 4 armQty. (A))8 Qty.
INSTRUCCIONES DE ENSAMBLAJE Instalación final 17. Presione las tapas de extremo (B) en la parte superior e inferior del brazo de montaje (A). 17 18. Coloque la placa de montaje (E) en el brazo de montaje (A). 18 A B E A 19. Fije la placa de montaje (E) al brazo de montaje (A) con los dos tornillos del brazo de montaje (PP) que retiró anteriormente. x2 hillips screw Qty. 8 PP OO Tornillo del brazo de montaje mm Lag bolt Qty. 2 PP 28 E A 2 1 Anchor Qty.
INSTRUCCIONES DE ENSAMBLAJE Nivel de instalación de los postes 20. Si es necesario, puede nivelar la pantalla plana +/- 3 grados. 20 ± 3° Nota: La nivelación se dificulta si los tornillos del brazo de montaje (PP) están demasiado apretados. 21 1 Ajuste de la inclinación 21. Ajuste el televisor en la inclinación deseada y manténgalo en esa posición. Gire la manija en la dirección de las manecillas del reloj tanto como sea posible.
GARANTÍA Este producto está cubierto contra defectos en los materiales y la mano de obra por 5 años. El fabricante reparará o reemplazará el producto o componente defectuoso según su criterio. No seguir las instrucciones de cuidado del producto del fabricante anulará esta garantía. Para obtener el servicio de garantía, póngase en contacto con el Servicio al Cliente al 1-602-674-1000. Debe suministrar una copia de su recibo original.
