Installation Guide

Lowes.com

Before beginning installation of product, make sure all parts are present. Compare parts with package

contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Installation Time: 2 hours

Tools Required for Assembly (not included): Adjustable wrench, hacksaw, flathead screwdriver, Phillips

screwdriver, tape measure, utility knife, pipe wrench

Part Description Quantity

A Pump 1

PREPARATION

Parts Required For Assembly (not included): sewage pump basin minimum 18 in. w x 24 in. deep,

basin cover, basin gasket, 2 in. check valve, 2 in. union, gate valve or ball valve as required by codes, 2

in. Sched 40 PVC pipe, 2-step PVC glue system (primer and sealer), cable or zip ties

PACKAGE CONTENTS

GENERAL PUMP INFORMATION

1. Sewage pumps are pumps used to remove

waste water that contains solids up to 2 in.

in diameter. The most common application is

for draining bathroom waste water to a sewer

or septic line.

Three prong

grounded

outlet

equipped

with a

ground fault

interruptor

2 in. Discharge

pipe

Upper level drainage

Cleanout

Flange

Lavatory

45°

Elbow

2 in. Check

valve

2 in. gate valve

Union

Vent pipe

Sink

Main waste

line to sewer

or septic tank

Switch

Pump