Installation Guide

8
Lowes.com
INSTALLATION INSTRUCTIONS FOR SMALL SPACES
1. For areas where space does not allow for standard
installation, pre-assembled pump system (A) can be
installed directly under a sink using an internal trap
(not included).
NOTE: Check local and state codes before using the
internal trap option.
4 in. min.
Internal trap
1
4 in. min.
Plus
4-1/2 in.
Tailpipe
2. Place the pre-assembled pump system (A) beneath
the sink and measure the distance between the sink
inlet and the basin lid. Minimum distance is 4 in. Add
4-1/2 in. to this dimension to determine total pipe length
needed.
2
A
A
3. Cut a tailpipe (not included) to the total pipe length in
step 2.
X
(4 in. min.)
4-1/2 in.
Tailpipe
Length
3