Installation Guide

11
Lowes.com
Trap
Assembly
10. Place the basin lid (E)/trap assembly from step 7 on
top of the basin (B), making sure the foam gasket (H) is
fi rmly in place. Screw in the 8 bolts removed in step 3.
10
Cord
Seal
Opening
11. Pull excess power cord through the cord seal (F)
opening and reinstall the cord seal (F). Make sure the
o-ring is seated in the seal before reinstallation.
11
12. Thread 2 in. coupling (not included) into the vent
opening on the top of the basin (B).
12
INSTALLATION INSTRUCTIONS FOR SMALL SPACES
E
B
F
B
H