Installation Guide

3a.

ASSEMBLY INSTRUCTIONS

Plug the male end of rope light (A) into female

end on power cord (B). Slide plastic ring on power

cord (B) over threads at male end of rope light

(A). Securely tighten plastic ring.

Determine the approximate location for the rope

light (A). Temporarily place mounting clips (AA)

against the mounting surface and mark the location

of the screw holes using a pencil or marker (not

included). Attach mounting clips (AA) to the

mounting surface with screws (BB).

Attach rope light (A) to the mounting surface with

mounting clips (AA).

Hardware Used

Mounting Clip

x 16

Screw

x 16

Plug power cord (B) into wall outlet.

DANGER: If using this light in a WET location,

connect this product to a Ground Fault Circuit

Interrupting (GFCI) outlet to reduce the risk of

personal injury, electrical shock or death. If one is not

provided, contact a qualified electrician for proper

installation.

3b.

AAAA

Plastic

Ring