Installation Guide

BULB REPLACEMENT INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

Install two 32-watt T8 (F32T8) bulbs (not included). Do

not replace with any other wattage of linear fluorescent

bulb. Install the bulb into the sockets by aligning the pins

of the bulb with the slot in the sockets. Using your thumb

and forefinger, press the metal ends of the bulb socket and

roll the bulb forward until it rotates 90 degrees inside the

socket, making contact between the bulb pins and the

socket contacts.

10.

Replace your grid (E) by aligning one side with the

outer lip of the fixture. Pivot the grid, and using your

fingertips, pull the edge of the grid out to wrap around the

outer lip of the fixture. Restore power to the electrical box.

Replace only with a linear fluorescent bulb: 32W F32T8. Do not replace with any other wattage of

linear fluorescent bulb.

Before replacing the bulb, shut off power to the fixture at the circuit breaker or fuse panel. Allow

sufficient time for fixture and bulb to cool.

1. By placing your fingertips under the top side of the

grid (E), pull the grid up and away from the

catches. Starting at one end of the grid, carefully free

one end of the catch and work your way to the other

end until the entire side is free. Once one side is free,

pivot the grid up; the other side should become free

from the other

catches. Set the grid aside.

Lowes.com