Installation Guide

2
TABLE OF CONTENTS
Specifications ................................................................................................................................... 2
Construction ..................................................................................................................................... 2
Safety information ............................................................................................................................ 3
Performance .................................................................................................................................... 4
Preparation ...................................................................................................................................... 5
Installation instructions ..................................................................................................................... 5
Troubleshooting ............................................................................................................................... 7
Warranty .......................................................................................................................................... 9
SPECIFICATIONS
Power supply required ................................................................................................. 115V, 60 HZ
Water temperature range ...................................................................................... Max. 77°F (25°C)
Individual branch circuit required ......................................................................... 15 Amp minimum
Discharge ............................................................... 1-1/2 in. FNPT or 1-1/4 in. FNPT (with adaptor)
Motor .................................................. Permanent Split Capacitor, with thermal overload protection
Power cord ..................................................................................................SJTW, 18AWG/3C, 10ft
CONSTRUCTION
Motor housing ................................................................................................ Aluminum die-casting
Volute (Intake screen) ................................................................................................ Thermoplastic
Impeller ..................................................................................................... Reinforced thermoplastic