Installation Guide

Hardware Used

3. Hold the xture pan (B) against the ceiling in position and mark the

4 mounting holes located near both ends of the xture. Using a 1/8 drill

bit, drill 4 holes.

If no ceiling joist is encountered, using a 3/16 in. bit, drill the holes and

tap the ceiling anchors in (GG). DO NOT attach to ceiling at this time.

4. Pull both xture wires through the 3/8 in. hole near the center

mounting hole. Fixture must be properly grounded. Connect xture

ground wire (back of xture pan) to ground wire in the electrical box

using wire nut (HH). These wires can be green or bare copper. Connect

the black supply lead with the black xture wire and white supply lead

with the white xture wire using wire nuts (HH). Push connections and

excess wire into the electrical box.

5. Secure the xture pan using screw cap (EE).

Ceiling Anchor Qty. 4

Wire Nut Qty. 3

Screw Cap Qty. 1

1/8in

0,32 cm

3/16in

0,48 cm

WOOD JOIST

MOUNTING

DRYWALL

MOUNTING

Ground

Neutral

Live