Installation Guide

6
NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
BEFORE INSTALLATION – Turn off power source.
Review all safety precautions.
1. Attach the duct connector (C) to the fan housing (A).
2. Remove wiring box cover (2.1) from fan housing (A).
Remove wiring knockout (2.2) from wiring box cover
with athead screwdriver (not included). Attach the
duct connector (C) to the fan housing (A).
3. Place the fan housing (A) next to a ceiling joist or
wall stud. The fan housing (A) should be level and
perpendicular to the joist or stud
Joist or
wall stud
3
2.1
2.2
2.3
2
A
2.2
2.1
A
1
A
C