Installation Guide

10
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
6. Insert fan housing (A) through existing hole in ceiling.
The fan housing (A) should be level and perpendicular
to the joist or stud.
7. Mount fan housing (A) to the joist or stud using wood
screws (7.1) (not included) where indicated by arrows
on fan housing (A).
8. Plug back in the power unit (8.1). Replace motor
assembly (8.2) using the three screws (8.3)
removed in step 1.
6
7
7.1
Joist or
wall stud
A
8
7.1
7.3
7.2
8.1
8.2
8.3